Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
I changed the software version of the CH341A and it installed fine. But, now it boots the CPU and does not give image. What could be the problem?
Request bios for HP PRODESK 600 G2 DESKTOP MINI
Collapse
X
-
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
try post #18..Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi peste
I have a hp prodesk 600 G2 mini whose bios IC is damaged. I have the replacement IC, but I need the original BIOS. I have tried several posted on this forum, but they don't work. Below is the original BIOS that I managed to extract from the damaged IC.Attached FilesLeave a comment:
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
hi this bios has password
nededd bios 600 g2 sff clean me and not passwordLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi Guys I need help with my HP prodesk 600 G2 mini, it gives me an error message on every boot "901-Rear chassis fan failed. There is no rear fan port on the physical motherboard. I've upgraded the cpu when this error started. The latest bios update didn't fix the error. Please help, thanksLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
with hpunlocker.exe you can remove the password.
bios checked ok, no passwordAttached FilesLast edited by santi2019; 03-02-2022, 03:31 AM.Leave a comment:
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hello, peste can you help me with this
I have HP ProDesk 600 G2 Small Form Factor pc
it gives 5 blinking red lights and 2 fast blinking white lights
this is my old dump
thank youAttached FilesLeave a comment:
-
-
i need pass unlouk
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINIAttached FilesLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
HELLO evrybody i need bios (HP PRODESK 600 G2 mt) i have admin password on bios i try old methode to reset bios but no way to do it please help meLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
i need bios bin for HP PRODESK 600 G2 sff pls
i tested mini and mt but still doesnt workLast edited by abdelilahocs; 01-03-2022, 03:30 PM.Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Post your serial number on the case and your bios backup.This type of error is sometimes caused by programming the wrong bios version.If it has the right bios then rolling back to an older version might fix it.Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi, I have a HP prodesk 600 G2, it gives me an error message on every boot "901-Rear chassis fan failed. Press enter to continue. Its a mini desktop and doesn't have the rear chassis fan. Could you please help me resolve this issue. Thank youLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Thank you Peste.Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi Peste, would you tell me in which address of the memory the password is locatedLeave a comment:
Related Topics
Collapse
-
My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.
- I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
- I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
- I could only locate two chips that look like bios chips. Could someone verify this
-
Channel: BIOS & Schematic Requests!
-
by zeancan anybody please help me open my bios so i can adjust my settings and play the game i used to play before, it always appear to have a password i don't even know, i tried entering my desktop password but it won't open and i didn't remember that i put a password onto it
HP ProDesk 600 G5 Desktop Mini
Manufacturer: HP
Product: 8598
Serial Number: PHVUT0A8JDOIDR
Version: KBC Version 08.09.20
please feel free to reply onto me if there's any other information u need to know to unlock it-
Channel: BIOS & Schematic Requests!
-
-
by SystemFuchsHi there,
I need your help, dumped the BIOS with CH431a controller, but the usual tools are not working because it is a 32MB Bios file.
Serial: 8CC13458H1...-
Channel: BIOS & Schematic Requests!
-
-
by beBossHi,
as noobie to this please excuse my lack of experience.
I am trying to remove a BIOS password from this machine:
HP ProDesk 400 G6 Mini
but so far I still have no success.
I bought CH341 programmer and decided to give it a try.
The programmer came with 8 pin cables and connectors or whatever everything else is called so I had to buy a new 16 pin cable because the chip which I think is the BIOS is with 16 pins..
I connected everything and downloaded AsProgrammer and NeoProgrammer then installed drivers...-
Channel: BIOS & Schematic Requests!
-
-
by eric2022HELP CLEAN ME
HP ProDesk 405 G6 DESKTOP MINI PC
SNL 8CC152147M
daf92mb26b0
...-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Leave a comment: