Hello, i have the same problem (corrupted bios)
Lenovo ThinkCentre M92p
Machine Type: 3237
Model Number: DM1
S/N: P8WBK8N (or P8W8K8N ?)
Product ID: 3237DM1
thanks in advance
M92p Desktop Bios
Collapse
X
-
Buenos dias Amigo, te cuento mi situación: Tuve problemas al actualizar la BIOS y no me daba video el equipo. Actualice con la BIOS que compartiste y da video correctamente, el problema es que al reiniciar el equipo a veces no da video. Podrias revisar mis BIOS Originales??
Mi Equipo es: Lenovo ThinkCentre M92p
Machine Type: 3207
Model Number: A29
S/N: MJRDYNN
Espero puedan ayudarme, gracias
Good morning, friend, I'll tell you about my situation: I had problems updating the BIOS, and my computer wasn't giving me video. I updated with the BIOS you shared, and it was giving video correctly. The problem is that when I restart the computer, sometimes it doesn't give video. Could you check my original BIOS?
My computer is: Lenovo ThinkCentre M92p
Machine Type: 3207
Model Number: A29
S/N: MJRDYNN
I hope you can help me, thank you.
in English please..
Attached FilesLeave a comment:
-
Mi Equipo es: Lenovo ThinkCentre M92p
Machine Type: 3207
Model Number: A29
S/N: MJRDYNN
Espero puedan ayudarme, gracias
Good morning, friend, I'll tell you about my situation: I had problems updating the BIOS, and my computer wasn't giving me video. I updated with the BIOS you shared, and it was giving video correctly. The problem is that when I restart the computer, sometimes it doesn't give video. Could you check my original BIOS?
My computer is: Lenovo ThinkCentre M92p
Machine Type: 3207
Model Number: A29
S/N: MJRDYNN
I hope you can help me, thank you.
in English please..Leave a comment:
-
-
This is my read bios(not working) Please help me, Thank you !
Thinkcentre M92P , Type 3209
S/N: PBW03Z1Leave a comment:
-
Hi everyone,
I am reporting success, the motherboard is functional. But I had problems with desoldering with hot air. At 380 degrees Celsius I left it because I was afraid of destroying the chip. Probably a very hard soldering wave. I used the classic method with soft tin and a suction copper wick. After soldering, nothing worked. Again, the copper wick helped, which removed microscopic bridges. So for the M92P model 3218 AL7 motherboard IS7XM ver. 1.0 the above-mentioned BIOS is functional. Thank you all again for your help.
ZdenekLeave a comment:
-
recep1982 thanks for the advice. I have already downloaded your files from 27.12.2024. They seem to be the same as those from SMDFlea from 19.3.2019. I will compare them in the programmer and try them. Then I will let you know how it turned out. Thank you all for the advice.Leave a comment:
-
I had previously shared the BIOS and EC files that work without issues. You can try them if you want.
Leave a comment:
-
I understood that I should overwrite U4(MX25L6406E) and U5(MX25L1606E). But I need the correct BIN file for each model 3218 AL7. Can someone please provide me with these files? Thanks in advanceLeave a comment:
-
Hi, I have a motherboard from ThinkCentre M92P IS7XM ver.1.0 Model: 3218 AL7. Original BIOS: 9SKT80AUS revision: 9S80A Date: 24.04.2014. When flashing in Windows to a new BIOS downloaded from the LENOVO website according to the serial number, the upgrade crashed. I can get into the BIOS, but booting does not work. I do not know which chip the BIOS is loaded on. Which one should I unsolder. There are two. U4: MX25L6406E and U5: MX25L1606E. I would also need a correct new BIOS. I have a programmer. I did the upgrade because of the CPU, which the older BIOS could not handle. Thank you very much for your help. SN is S4NXNT3Leave a comment:
-
Hi, I have a motherboard from ThinkCentre M92P IS7XM ver.1.0 Model: 3218 AL7. Original BIOS: 9SKT80AUS revision: 9S80A Date: 24.04.2014. When flashing in Windows to a new BIOS downloaded from the LENOVO website according to the serial number, the upgrade crashed. I can get into the BIOS, but booting does not work. I do not know which chip the BIOS is loaded on. Which one should I unsolder. There are two. U4: MX25L6406E and U5: MX25L1606E. I would also need a correct new BIOS. I have a programmer. I did the upgrade because of the CPU, which the older BIOS could not handle. Thank you very much for your help. SN is S4NXNT3Leave a comment:
-
Hello, I wish everyone good luck. I wanted to share with you the bios and ec file that is working smoothly. tested OK without any problemsAttached FilesLeave a comment:
-
-
-
-
-
help to recover my bios lenovo thinkcentre m92p
plsAttached FilesLeave a comment:
-
-
So should your BIOS work with mine, or not? My atteched BIOS is my (faulty) dump.Leave a comment:
-
Should this BIOS work also on other Serial Number? hoaca388 Or not?
I flashed it, now i get 3 short + 1 long beep. With original BIOS it didn't beep at all.
3238
Model Number AK9
S/N P8VXVCP (or PBVXVCP, can't tell if it's B or 8)Leave a comment:
Related Topics
Collapse
-
My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.
- I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
- I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
- I could only locate two chips that look like bios chips. Could someone verify this
-
Channel: BIOS & Schematic Requests!
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by grimacelordHello there.
I am working on a Lenovo Legion T5-26AMR5 desktop that currently has a corrupt BIOS and I have been unsuccessful thus far in trying to fix it myself.
History:
1. This computer came to me initially with an error message that said "BiInitializeLibrary failed 0xc0000001" or "0135 fan error". It would always be one of the two errors. It should be noted that when it produced the fan error, there was no physical problem with the fans. They were all spinning just fine.
I searched for this error online and discovered...-
Channel: BIOS & Schematic Requests!
-
-
by AustinCERHello,
I currently have an HP ENVY Desktop TE01-1214
S/N - 2MO22342GX
Motherboard - L75365-001
BIOS Chip - W25Q128JVSQ
Suspected Windows updates contained BIOS update in which, during update the Desktop PC displayed a black screen to the monitor while still powered on. Display image never restored.
Tested RAM in both slots, as well as new RAM. Tested a brand new known working i5-10th Gen GPU (Same CPU as original installed). Cleared CMOS. Tested the Desktop PC with a dedicated GPU connected, but still no display. Device will not POST when powered...-
Channel: BIOS & Schematic Requests!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: