iMac A1312 Firmware password locked. How to overcome , please help and advice.
iMac A1312 Firmware password.
Collapse
X
-
Re: iMac A1312 Firmware password.
Clear the PRAM and NVRAM.Don't buy those $10 PSU "specials". They fail, and they have taken whole computers with them.
My computer doubles as a space heater.
Permanently Retired Systems:
RIP Advantech UNO-3072LA (2008-2021) - Decommissioned and taken out of service permanently due to lack of software support for it. Not very likely to ever be recommissioned again.
Asus Q550LF (Old main laptop, 2014-2022) - Decommissioned and stripped due to a myriad of problems, the main battery bloating being the final nail in the coffin.
Kooky and Kool Systems
- 1996 Power Macintosh 7200/120 + PC Compatibility Card - Under Restoration
- 1993 Gateway 2000 80486DX/50 - Fully Operational/WIP
- 2004 Athlon 64 Retro Gaming System - Indefinitely Parked
- Main Workstation - Fully operational!
sigpic -
Last edited by budm; 04-18-2016, 10:19 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
Related Topics
Collapse
-
by NopslideHello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....-
Channel: BIOS Requests ONLY!
-
-
by howardc64Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....-
Channel: Troubleshooting Computer Displays
-
-
by outsiderHello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...-
Channel: BIOS Requests ONLY!
-
-
by gokhan338Hello friends, can you remove the EFI password of the imac a2116 emc3195 device?...
-
Channel: BIOS & Schematic Requests!
-
-
Apple iMac 27" A1312 820-2901-A Board View...
-
Channel: Schematics and Boardviews
10-03-2024, 10:00 AM -
- Loading...
- No more items.
Comment