I think it would be dumb to toss a "modern" motherboard just because a resistor got scraped off, so here I am. I am hoping to find the right schematic so I can see if the motherboard can live without 1 of 3 60B SMDs in series likely scratched off by the backplate of a PCI-E card install or removal. It could be related to a functionality that is not needed or critical, or it could fry anything I plug into it and power on. If I could find a replacement, I could likely pop in on the board, but if I don't need to, then screw it, I don't mind leaving something dark that doesn't matter.
Attached is a photo of the problem, along the left side, mid way up, a set of 3 SMD resistors, which I presume to all be 60B, with the top one missing. If someone knows what this is connecting to, please let me know, or better yet, if there is a schematic that can be shared, I don't see any other posts about this version of motherboard specifically. I would hate to fire the system up and find it fries something because a temp sensor or voltage regulator isn't working right.
Attached is a photo of the problem, along the left side, mid way up, a set of 3 SMD resistors, which I presume to all be 60B, with the top one missing. If someone knows what this is connecting to, please let me know, or better yet, if there is a schematic that can be shared, I don't see any other posts about this version of motherboard specifically. I would hate to fire the system up and find it fries something because a temp sensor or voltage regulator isn't working right.
