Announcement

Collapse
No announcement yet.

Supermicro C9X299-PG300F bios dump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Supermicro C9X299-PG300F bios dump

    Device Desktop motherboard
    manufacture: Supermicro
    motherboard: C9X299-PG300F
    S/N: ZM187S026581
    Problem: Black screen.
    Description
    The customer reported a message: usb device over current status detected.
    I tried to download the bios from the manufacture, It has a bin file but didn't work. I'm not sure if the bin file design to be programmed directly to the chip or maybe I need to extract the body
    I programmed this bin file but didn't work.
    https://www.supermicro.com/en/suppor...99-PG300F/BIOS
    All power rails are present
    Attached Files

    #2
    Originally posted by nissimezra View Post
    Device Desktop motherboard
    manufacture: Supermicro
    motherboard: C9X299-PG300F
    S/N: ZM187S026581
    Problem: Black screen.
    Description
    The customer reported a message: usb device over current status detected.
    I tried to download the bios from the manufacture, It has a bin file but didn't work. I'm not sure if the bin file design to be programmed directly to the chip or maybe I need to extract the body
    I programmed this bin file but didn't work.
    https://www.supermicro.com/en/suppor...99-PG300F/BIOS
    All power rails are present
    You just need to use the *.bin file directly after extracting.
    Attached Files
    Last edited by hoaca388; 02-09-2024, 07:32 PM.


    ----------------------------------------------------------------------------------------------------------------------------------------------------------
    All donations to Badcaps are welcome.
    Become a Badcaps supporter
    >>>>> click on this link to donate <<<<<
    Thanks to all supporters.
    ----------------------------------------------------------------------------------------------------------------------------------------------------------​

    Comment


      #3
      Originally posted by hoaca388 View Post

      You just need to use the *.bin file directly after extracting.
      Many thanks

      Comment

      Working...
      X