- Hp EliteDesk 800 G3 SFF, 2UA8202CFW , board model number PFYTH0KD6AF811 AS#901017-001 REV 0K
"bios need" FULL DUMP 8mb and 16 mb
-
-
Can any one help repair old bios -
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Thank you for your help work now thanks alot for your help
Last edited by mustafawaraad; 12-06-2023, 12:50 PM.Comment
-
Hp EliteDesk 800 G3 SFF
SERIAL N0 - JPH751VJB9
board model number AS#901017-001
PALES REPAIR THIS BIOS 8mb and 16 mbComment
-
any one can help de rebuild myb ios for HP EliteDesk 800 G3
Serial: MXL9303LH1
thx in advance
Comment
-
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello,
I am looking for a full SPI BIOS dump for the following laptop:- Model: Lenovo V15 G4 ABP
- Type: 83CR
- CPU: Ryzen 7 (Radeon Graphics)
- Board: KV483 / NM-F631
- BIOS chip: XMC 25R128 (16MB / 16,777,216 bytes)
- Region: India / IRU variant
- Condition: No power, no LEDs, no fan
- Laptop stopped powering on after a BIOS update
- AC adapter and DC-in confirmed OK (19–21V present)
- No shorts found on main rails
- SPI BIOS was read/written successfully with programmer (verify OK)
- Tried official Lenovo BIOS (EXE extracted & trimmed) — still dead
- Suspecting wrong
-
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...
Comment