Hello,
I need bios for this PC
HP EliteOne 800 G4 TWR,
S/N: 4CE9010F0G
Thanks
I need bios for this PC
HP EliteOne 800 G4 TWR,
S/N: 4CE9010F0G
Thanks
-
-
Re: HP EliteOne 800 G4 TWR
Old File -
Re: HP EliteOne 800 G4 TWR
any bodyComment
-
Comment
-
Re: HP EliteOne 800 G4 TWR
boot with black screen.Last edited by Zaraki7777; 05-21-2023, 01:56 PM.Comment
-
Re: HP EliteOne 800 G4 TWR
Try "old ME_Clean" first. The serial number in your backup is 4CE9010F79 ,so it isn`t the original one
.Last edited by SMDFlea; 05-21-2023, 03:15 PM.Comment
-
I bought a new chip but no bios bin file
available for my hp 800 g4 workstation twr
the serial number and part number is 4CE8482CCT PHKZK0CCYBI1A5...
If anyone have it kindly share it with me ..
Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
The original bios chip being damage during soldering and I don't have any backup file ....Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hello guys,
kindly help me with a new dump for this desktop.
it powers on well but there's no display
HP Elite Desk 800 G4 TWR
S/N:CZC932CNJF
Product no_2UZ41AV
attached below are my Back ups both 32 and 16 Mb filesComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
​https://www.badcaps.net/donateComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
​https://www.badcaps.net/donateComment
-
Hello, I have a problem with this PC, I couldn't install Windows because it froze during installation. I wrote another dump in the main bios, but after that the computer wouldn't boot. The computer beeped 6 long times and 3 short times, and the red light blinked. I wrote the original bios that I saved earlier, but it still won't boot, and beeps 6 long times, and 3 short times. I'll forward the original dumps. Please help colleagues. Thanks.
HP EliteDesk 800 G4 TWR,
S/N: CZC8468FXRComment
-
Yes, I checked cmos battery.Comment
-
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hello Everyone,
I have HUAWEI MateBook X Pro 2019 (MACH-WX9) whose BIOS got corrupted i beleive. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need BIOS bin/hex file which i could use to reflash it externally via the flasher tool.
It seems like the support page of this model no longer exist: https://consumer.huawei.com/be/lapto...ro-2019/specs/
In the website, you can only see specs etc.
I have not tried to extract the BIOS dump yet as I want to see if there is any ray of sunshine... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...
Comment