Hello yet again!
I have this DELL GTX 660 with 1.5GB of GDDR5.
One +12V MOSFET died, removed and no more 6-pin short.
It was displaying "connect +12V" error. Once removed the mosfet, it worked but with one less +12 power rail. Tested a bit with OCCT but not for long.
I soldered a new MOSFET but fried again. The issue was elsewhere.
At some point another +12V died and this time it wasn't powering on anymore.
Even PEX isn't getting voltage anymore.
The issue was a smaller component, NCP81062, "driver". Removed, no more shorts.
I ordered the components but they got lost.
I was wondering if anyone had the schematics for this board or any other GTX660 base model.
Thanks for any input!
All involved components:
- https://pdf1.alldatasheet.com/datash...MFS4927NC.html
- https://pdf1.alldatasheet.com/datash.../NCP81062.html
- https://pdf1.alldatasheet.com/datash...MFD4902NF.html
- https://www.alldatasheet.com/view.js...4936N&sField=3
I have this DELL GTX 660 with 1.5GB of GDDR5.
One +12V MOSFET died, removed and no more 6-pin short.
It was displaying "connect +12V" error. Once removed the mosfet, it worked but with one less +12 power rail. Tested a bit with OCCT but not for long.
I soldered a new MOSFET but fried again. The issue was elsewhere.
At some point another +12V died and this time it wasn't powering on anymore.
Even PEX isn't getting voltage anymore.
The issue was a smaller component, NCP81062, "driver". Removed, no more shorts.
I ordered the components but they got lost.
I was wondering if anyone had the schematics for this board or any other GTX660 base model.
Thanks for any input!
All involved components:
- https://pdf1.alldatasheet.com/datash...MFS4927NC.html
- https://pdf1.alldatasheet.com/datash.../NCP81062.html
- https://pdf1.alldatasheet.com/datash...MFD4902NF.html
- https://www.alldatasheet.com/view.js...4936N&sField=3
Comment