Asus B250G Gaming BIN File needed.
Can anyone convert this cap file to BIN?
Can anyone convert this cap file to BIN?
-
-
Re: Asus b250g bios request
You can use a hex editor, delete 0 - 7FF hex then save. Or you can use UEFITool .Open the bios, select "Action" -> "Capsule" -> "Extract body" ,save as *.rom or *.bin
UEFITool https://github.com/LongSoft/UEFITool..._A57_win32.zip
-
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hello to all of you! I need help with a BIOS file.
The BIOS chip is fried on my Asus F542UN laptop, and I bought a new chip that needs programming. I have a CH341a programmer but I need a .bin BIOS file. On Asus support page the firmware has another extension, .310 and from reading on this forum I understand that that file is not complete BIOS.
So, in short I need the "complete" BIOS .bin file to flash on the new chip. Another issue is that on back of the case the label says F542UN but on the sticker on the motherboard it's X542UN. -
Hello friends, my brother asks for my help to repair his laptop,
he says that the bios update suddenly appeared and he turned off the computer before finishing.
Now the screen doesn't turn on. Does anyone have a dump of this model?
Asus vivobook 17 model X712DA
I was also able to backup the current dead bios with my ch341... -
Hello,
laptop had dead cpu, 3x UP9030P, audio (5v+3v+MEM short) i replaced all, now laptop turns on, vcore=1.1V, vddnb=1v, vcore_gpu=0,7v, vmem=1.1, vmem_gpu=1,2v, now to not make this a diag req. - just extra info, basically:
original bios not available, dead bios chip, the laptop model is GA503RS, serial: N3NRCX13C597136, equipped originally with ryzen 7 6800HS, rtx 3080 - i replaced cpu, was ballsy, now there is 100-000000544 (i think its ryzen 9 6900HS/HX) - original bios behaviour=laptop turns on, cpu gpu warm, vrms continually get hotter, fan spin lower, gets faster with hotter... -
Hello
The adapter input connector was broken and the IO was burnt. I replaced it and now I don't have a dump file.
The IO model is also it8995e-138 cxs and the motherboard is p435uj rev:2.1
Thanks​...
Comment