Palit Jetstream 1070 GTX no screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xAiCx
    New Member
    • May 2022
    • 4
    • Germany
    #1

    Palit Jetstream 1070 GTX no screen

    Hello together

    I got a PALIT Jetstream 1070 GTX graphiccard which does not show any screen.
    I Checked all voltages : Pexrail 1V, 3.3V ,5V ,12V, Vmem 1.4v, Vcore shows 0.8xxV (i read somewhere thats normal when GPU is not booting up) , 1.8V ,

    Also checked PCIe 12V and 3.3V no short

    Its really hard to find similar Board Layout from the Bottom side because i found this part "SC244" missing ?

    https://drive.google.com/file/d/161g...w?usp=drivesdk

    https://drive.google.com/file/d/15vd...w?usp=drivesdk

    https://drive.google.com/file/d/160N...w?usp=drivesdk
    Last edited by xAiCx; 05-17-2022, 12:04 PM.
    Tags: None
    • xAiCx
      New Member
      • May 2022
      • 4
      • Germany
      #2
      Re: Palit Jetstream 1070 GTX no screen

      When I start the computer I have no signal on DVI and HDMI either , but after a couple of seconds ,the status led on screen (with DVi) turns from orange to blue and the screen shows me a blackscreen...

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          Thermal pad thickness for various laptop GPU / Graphics Cards
          by Document Archive
          Thermal pad thickness for various laptop GPU / Graphics Cards

          ASUS Dual RTX 2070 OC 8GB
          ASUS ROG STRIX RTX 3080 OC
          ASUS ROG STRIX RTX 3090
          ASUS TUF Gaming RTX 3080 OC Edition
          ASUS TUF GTX 1660 S-O6G GAMING
          EVGA RTX 3060 Ti XC GAMING 8GB
          EVGA RTX 3060 XC GAMING 12GB GDDR6
          EVGA RTX 3080 FTW3 ULTRA GAMING
          EVGA RTX 3080 TI FTW3 ULTRA GAMING
          EVGA RTX 3090 XC3 ULTRA GAMING 24GB
          Gainward RTX 2080 Phoenix GS Specs
          Gainward RTX 3070 Phoenix 8GB
          Gainward RTX 3080 Ti Phoenix
          GIGABYTE AORUS RTX 3080 MASTER 10G
          ...
          GPU - GPU - Thermal pad thicknesses for laptop video cards - schematic download
          https://www.badcaps.net
          02-09-2024, 08:08 AM
        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • Prott
          Palit Jetstream 1070 - SMD code question
          by Prott
          Hi,
          I got my hands on a 12 V / 5 V shorted Palit 1070. However few components got blown away during the short, including a 5V buck controller (marked SU2 on the photo).

          The (supposed) 5V buck controller is marked W077 - so far it looks pin compatible with the standard RT7296F, however I can't find what exactly is this smd to double check with the datasheet.

          Does anybody please know what is this W077 SMD and if I can safely exchange it for the usual RT7296?

          Thank you. ...
          09-22-2022, 07:09 AM
        • reformatt
          Macbook Air M2 A2681 Kernel panics after screen replacement
          by reformatt
          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
          07-31-2025, 08:37 PM
        • smic717394
          iphone XS turns off when press on screen.
          by smic717394
          Hi,

          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
          07-25-2024, 10:16 AM
        • Loading...
        • No more items.
        Working...