Bridged pads on RTX 2080

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Borges
    New Member
    • Dec 2021
    • 8
    • España

    #1

    Bridged pads on RTX 2080

    The layout of the pads should be as you see in this picture. Does anyone know how to fix this mess?
    Attached Files
  • foshland
    Senior Member
    • Jan 2017
    • 122
    • Spain

    #2
    Re: Bridged pads on RTX 2080

    Very easy, flux and a normal solder iron, solder should stick only to solder pads, try

    Comment

    • frazerxavier
      Member
      • Mar 2021
      • 42
      • India

      #3
      Re: Bridged pads on RTX 2080

      Flux is your best friend when soldering.

      Comment

      Related Topics

      Collapse

      • acedogblast
        Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
        by acedogblast
        This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

        There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
        11-02-2024, 05:13 PM
      • dbuergi
        Restore solder pads for SMC on MacBook A1466
        by dbuergi
        Hi all,

        i got a A1466 logic board for spare parts but it looks like the SMC ist bad. I got several spares but somehow i was too fast while removing it and ripped some pads off. You can see the damage attached.
        Just for experience i would like to restore the lost pads but before i start (haven't done this before) do you have some hints or tutorials how to do it?
        As written i want to improve skills so it doesnt matter if it takes longer.
        12-29-2024, 10:24 AM
      • Document Archive
        NVIDIA GeForce RTX 2080 Schematic & Board View
        by Document Archive
        NVIDIA GeForce RTX 2080 Schematic & Board View

        The GeForce RTX 2080 is an enthusiast-class graphics card by NVIDIA, launched on September 20th, 2018. Built on the 12 nm process, and based on the TU104 graphics processor, in its TU104-400A-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 2080. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The TU104 graphics processor is a large chip with a die area of 545 mm² and 13,600...
        10-02-2024, 07:57 AM
      • Document Archive
        NVIDIA GeForce RTX 2080 Ti Schematic & Board View
        by Document Archive
        NVIDIA GeForce RTX 2080 Ti Schematic & Board View

        The GeForce RTX 2080 Ti is an enthusiast-class graphics card by NVIDIA, launched on September 20th, 2018. Built on the 12 nm process, and based on the TU102 graphics processor, in its TU102-300A-K1-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 2080 Ti. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The TU102 graphics processor is a large chip with a die area of 754...
        10-02-2024, 08:01 AM
      • chth96
        Is it good to use chemistronic flux off es835b for flux remover?
        by chth96
        I want to purchase any good flux remover But "chemistronic flux off es835b" is the most common flux remover in my nation..
        Is it good to use chemistronic flux off es835b for flux remover?
        Or I have to purchase "3m novec flux remover" which is quite expensive in my nation?
        11-17-2023, 07:25 AM
      • Loading...
      • No more items.
      Working...