Asrock FM2 mainboard mosfet info

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 386SX
    New Member
    • May 2020
    • 2
    • Italy
    #1

    Asrock FM2 mainboard mosfet info

    Hi,

    I've an Asrock FM2A55 DGS mainboard and got it untested and as usual don't boot up (fan ran, chipset get warm but no beeps no video output). After every usual no-posting solutions (cpus, ram, pcb cleaning, etc), I was expecting it to be broken but only lately I've seen a smd component with the package broken on the mainboard, the Q38 marked one. Thanks to another forum user info, what I look for should be an AP2309GN p-mosfet in the SOT23 package. Considering that specific one seems not easy to be found on the usuals online europe stores, would you suggest some compatible p-mosfet model? For example it seems the AO3401 is easier to find and having similar values but not exactly. Which values do I have to consider for looking a compatible one while others I may not consider?
    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Jane
      How do you test MOSFET in laptops ?
      by Jane
      I tried to use this method:

      Testing an N-channel MOSFET:

      Step 1: Discharge the Gate (turn off the MOSFET)
      Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
      Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

      Step 2: Charge the Gate (turn on the MOSFET)
      Now, place the red probe on the Gate (G) and the black probe on the      ...
      09-27-2024, 03:31 AM
    • Nooy
      VGA MOSfet permanently shorted and loss of MOSfet pad
      by Nooy
      Hello everyone, I recently found this badcaps site and super Learn Electronics Repair youtube channel. And I wanted to learn how to troubleshoot power supplies and VGA cards and how to practice soldering, since I already have a properly defective piece of them. I am currently trying to solve two problems:

      I have a Gigabyte GV-RX460WF2OC-4GD type card. I managed to find the faulty MOSfet (AON6414A) on it, which I replaced. The card starts up, but after about half a minute, the MOSfet in the same position will be shorted again. Is it possible that the PWM controller driving the MOSfet...
      02-14-2024, 02:26 AM
    • stavi
      Asrock 775V88+ mosfet identify
      by stavi
      Hello,

      I want to identify a mosfet. Unfortunately, I couldn't find the asrock 775v88+ schematic.
      Does anyone know what this mosfet could be? It is between the agp port and the 1st pci slot. Q14 is his number.

      Thanks for the help...
      09-08-2022, 07:49 AM
    • redbaron1007
      Help identifying mosfet on Razer Blade RZ09 (CH570_MB_NT)
      by redbaron1007
      I have a Razer laptop (RZ09 MB# CH570_MB_NT) that has a shorted mosfet marked BND M03 E067 that I'm unable to find anywhere online. Does anyone either know what the part number is for this mosfet or have a schematic I can find it in?

      Backstory on the whole thing the laptop was plugged into a lamp at a hotel. The lamp got unplugged while it was charging and now the system won't power on anymore. I found the caps around this mosfet shorted and when I injected voltage into the caps the mosfet got hot and my bench psu was pulling 5A. Pretty sure this is all that's wrong with the laptop...
      1 Photo
      09-09-2025, 11:10 AM
    • AppleLover123
      Asus X712EA 3 volts after the first mosfet
      by AppleLover123
      Hey guys,

      i have a asus motherboard here and as the title says after the first mosfet (in the picture) there is nothing more than 3.15v.
      I injected 19v and max. 1 amp at the charging port and there is not voltage drop or smth. It's just taking 19v and 1 milliamp.
      Then i tried to inject 19v and max 1amp after the current sensor and there it first takes 19v and 4 milliamps and after 2 seconds it is taking nothing (no current).
      I measured on the coils on board everything seems fine. Also the main power rail is not shorted (infinite resistance).
      Now i thought something...
      12-15-2024, 07:49 AM
    • Loading...
    • No more items.
    Working...