I'm just going to list the major caps on the board, so that if someone else gets one, they'll have a list without hurting their eyes. Not going to list by position or anything else, because I can't always remember which are VRM and which aren't.
6.3v, 2200uF, 10mm dia, 25mm L, SACON (sz201 - green and gold) - qty 6
16v, 1500uF, 10mm dia, 25mm L, SACON (sz112 - black and gold) - qty 3
10v, 1000uF, 8mm dia, 14mm L, D.S (su - black and white) - qty 7 (These are the ones that failed - three obvious bulging ones near the Northbridge? heatsink.
16v, 330uF, 8mm dia, 11-12mm L, DS, (black and white) - qty 6
16v, 100uF, 6.3mm dia, 8mm L, DS (black and white) - qty 12 (I think)
25v, 22uF, 5mm dia, 8mm L, DS (black and white) - qty 7 (I think)
25v, 10uF, 4mm dia, 8mm L, DS (black and white) - qty 8 (I think)
The ones that are 'I think' are because you lose track after running around the board with so many of the dinky things. I counted twice, as best as I could.
I'll be taking before and after photos of each board as I go along as well.
6.3v, 2200uF, 10mm dia, 25mm L, SACON (sz201 - green and gold) - qty 6
16v, 1500uF, 10mm dia, 25mm L, SACON (sz112 - black and gold) - qty 3
10v, 1000uF, 8mm dia, 14mm L, D.S (su - black and white) - qty 7 (These are the ones that failed - three obvious bulging ones near the Northbridge? heatsink.
16v, 330uF, 8mm dia, 11-12mm L, DS, (black and white) - qty 6
16v, 100uF, 6.3mm dia, 8mm L, DS (black and white) - qty 12 (I think)
25v, 22uF, 5mm dia, 8mm L, DS (black and white) - qty 7 (I think)
25v, 10uF, 4mm dia, 8mm L, DS (black and white) - qty 8 (I think)
The ones that are 'I think' are because you lose track after running around the board with so many of the dinky things. I counted twice, as best as I could.
I'll be taking before and after photos of each board as I go along as well.
Comment