netvista 6578 recaps (+/- successful)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • renoracing
    New Member
    • Sep 2007
    • 1

    #1

    netvista 6578 recaps (+/- successful)

    Hi everyone,

    i'm very happy to have find to forum and recaps with some succes my ibm netvista 6578 motherboard. After a long don't working this PC is coming back to life after i change 1200 uF and 1500 uF caps. But now i have some stability problem with it. PC froze when installing OS. I suspect integrated video card to be faulty. Does anyone have similar problem after recaps only le biggest caps ? Maybe i will need to recaps other capacitor ! Some comments ?


    Thanks

    Renoracing
  • starfury1
    Badcaps Legend
    • May 2006
    • 1256

    #2
    Re: netvista 6578 recaps (+/- successful)

    well don't know about netvista 6578

    but yeah sometimes weird things happen when installing on name brand PC's , they usually have there own setup disks
    (which has drivers etc)

    So maybe that is the issue you may have to hack the install to get it to work
    (build a slip stream CD with driver or something)

    Thats if you are using a windows retail type disk

    I dont know.

    Just on the caps did you replace all the caps are around the Cpu and Mosfets?
    (VRM is what I am talking about here)

    Or just a few that were popped

    Normally you replace all with new one's...its really the best and only way to go.

    They should be Quality Low ESR types for VRM
    (read posts around here you soon get what I mean, if you haven't already.)
    (sounds like you have thought)

    I ask this cause some people don't and they still could have failed caps or more likely caps that will fail soon


    Apart from that you could if you suspect a video problem perhaps turn it off and use a card if you can do it that with that MB..again don't know.

    Hopefully someone will post that knows these systems with more accurate info for you

    Cheers & welcome
    You step into the Road, and if you don't keep your feet, there is no knowing where you may be swept off to." Bilbo Baggins ...

    Comment

    • Spacedye69
      Badcaps Veteran
      • Nov 2005
      • 698
      • US

      #3
      Re: netvista 6578 recaps (+/- successful)

      I replace all caps that have a vent. On some boards, this means 100uf and up. Bad caps around the agp, pci, or memory slot can have some strange effects that are hard to track down.

      Comment

      Related Topics

      Collapse

      • momaka
        Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
        by momaka
        I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

        For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

        https://www.badcaps.net/filedata/fetch?id=3591771


        https://www.badcaps.net/filedata/fetch?id=3591772

        It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

        https://www.badcaps.net/filedata/fetch?id=359177...
        03-12-2025, 03:42 PM
      • eryjus
        Heathkit IO-4205 Power Supply Caps
        by eryjus
        Hello,

        First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

        I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

        I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
        ...
        05-10-2023, 11:21 AM
      • Paxman_Swede
        Identifying caps on an old Zoom 9000
        by Paxman_Swede
        Hello!

        I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

        The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

        I have studied the board and...
        01-14-2025, 09:51 AM
      • captain150
        Help with switching power supply caps
        by captain150
        I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
        I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
        03-16-2025, 07:34 PM
      • Foetuss
        Gigabyte GA-6OXT :: caps question
        by Foetuss
        Good evening

        I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
        Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

        But I was also suprised about the bigger boys, which are 330µF 25V.
        Could it be they used 25V caps because they were cheaper / available at that time?...
        02-11-2025, 12:22 PM
      • Loading...
      • No more items.
      Working...