MSI V381 REV 4.1 VDDCI_MEM LOW RESISTANCE

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jermac0711
    Senior Member
    • Jun 2022
    • 70
    • Philippines
    #1

    MSI V381 REV 4.1 VDDCI_MEM LOW RESISTANCE

    Guys I need some advice with this GPU..
    All voltages is present except on vddci_mem
    enable signal is present< pwrgood is present in U704 but no output voltage going to L705.

    RESISTANCE : DIODE MODE 0.0022

    Click image for larger version Name: image.png Views: 75 Size: 469.2 KB ID: 3711868​
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Nagy Daniel
      Lowest possible resistance on laptop motherboard rail - Guide Table request
      by Nagy Daniel
      Hi, I'm Daniel, and I'm new to the world of repairing motherboards.

      I would like to create a table, or more likely a guideline about the voltage rails and their possible resistance rail.

      I know that the motherboard design has a very big depend on the rail's resistance, but I would like to know what is the smallest value for a rail that can be acceptable. For example, I heard that some new gaming motherboards can have 0,5 Ohm resistance on the GPU rail, but on an older type, it could be a sign of a shorted GPU rail.

      So, I generated a table with AI so I can...
      03-04-2025, 08:24 AM
    • cind12
      GTX 1080 TI Gigabyte Aorus low resistance on vmem
      by cind12
      Hi guys, i was wondering, i've got 9Ohms on Vmem, one of the mosfet was shortet to ground, so i've desoldered hi and low mosfets nad still low res, then i removed all of the memory chips, and the resistance is still low, so did you had maybe a card with that low res on memories, and the card was working fine ?
      Removed the U1866Q and still without result, i dont have thermal cam so can't see where is hot spot when incjeting voltage.
      The resistance on core is ok 0.1Ohm ((Power 0.8V when on)
      Resistance on 12V 4K ohms (Power present when on)
      Resistance on 12V PEX 4K ohms...
      12-08-2023, 09:09 AM
    • ResoluteHawk
      Lenovo Legion S7 15ACH6 Not Posting
      by ResoluteHawk
      I have a customer that brought in a Lenovo Legion S7 15ACH6. The problem is that the laptop is not posting.

      My first thought was to take out the DRAM and put it back in.
      No POST.

      Then I swapped the dedicated RAM with good known working RAM.
      No change.

      I then measured to see if 1.2V was being generated for the memory to turn on, so I measured PL600 which is where the output of the 1.2V rail is.
      Resistance was good; measuring ~40Ohms with the slotted RAM in.

      I took the slotted memory out and measured again.
      Resistance with...
      12-02-2024, 10:17 AM
    • novice1
      Acer Aspire E5-574G - Not Powering On
      by novice1
      Laptop name Acer Aspire E5-574G. Processor = i7-6500u. GPU = NVIDIA GEFORCE 940M. Motherboard Model = DA0ZRWMB6G0

      This laptop was not powering on at all so I started investigating. The blue light would come on for a second, and then disappear. Fan would sometimes turn on for a second and then shut off immediately, and at other times would not turn on at all.

      To start with, about 3 months ago I had no clue about soldering, motherboard schematics, board view, and then I stumbled about this forum and other stuff online. I have never done any of those before. But to ask...
      11-03-2023, 05:53 PM
    • flusher
      Apple MBP16" A2141 820-01700 PMIC power cycles no boot no shorts
      by flusher
      Bought myself a project thing. Apple MBP16" A2141 820-01700
      No shorts, no visible waterdamage.
      Dead. no history.
      All USBC ports do 20V and charging battery.
      If you plug battery/charger PPBUS is 12.6v and all power rails like RTC, 3v3, 5v etc are present. U7800 PMIC all voltages are present APART from PPVCCPRIMCORE_PRIM_REG (not sure if it has to be present at this stage?! resistance is 40 Ohm). SSD 2.5, 0.9, 1.8 are present on both wings. Charger meter shows 30ma or something like this on charged battery.
      But what PMIC does is that it power cycles(dropping to...
      02-21-2025, 03:12 PM
    • Loading...
    • No more items.
    Working...