Zotac Trinity RTX 3080 - 20A load

[LealEletronic]

Hello guys.

I have a RTX 3080 zotac Trinity on my bench that hasn't vídeo. All the DC DC tension are working, fans aren't at 100%, but working normally. But....... The current load os about 20A more. GPU get hot, but not so much, the memories get hot, VRM is 1.40V, VCore 1.10V.

All this tests os only in the bench, without any signal in the PCIEX.

Só, the question, GPU probably dead? What you guys can say?

[ktmmotocross]

it is 3080. u dont have picture with bad memory. is it detected ? what show mods?

[LealEletronic]

it is 3080. u dont have picture with bad memory. is it detected ? what show mods?

To be honest I don't try it on mods. I will do this to see if any memory has some problem.

[LealEletronic]

Hi guys, here I'm again. So I try to use mods/mats but I think something isn't right, to be honest I never use it.

Son I did some research and make a bootable flashdrive and put the version 500.00 in the mais folder, but when I turn on the PC it gets into mata and star to load some scripts by itself and then show the Fail message. But I can't se the results. I tried some commands like report.txt, nano report.txt and nothing works. I think that the program is not recognize the GPU or something like. I did a lot more research but I can't found a tutorial or something like this how to use and install mats/mods. I just saw a lot of different and mixed information.


So if some one could help me with this I appreciate.

A good day for all.

[ktmmotocross]

why not upload foto of your fail so we be able to help