Hello.
Looking for some help mainly to read schematics and understand posible reasons for missing signals.
GPU in question is 6800xt red devil.
It was artifacting to begin with, Tserver memtest's no faults found. Put card on shelf for 6 months. started troubleshooting again last week and card is totaly dead.
12V rail
5V rail
3.3_AUX and thats it.
1.8V_S5 missing and no other voltages.
I dont have Enable signal for 1.8v
Schematics and boardview attached.
Can any one advice me on what signals should i investigate. ? Thanks.
Looking for some help mainly to read schematics and understand posible reasons for missing signals.
GPU in question is 6800xt red devil.
It was artifacting to begin with, Tserver memtest's no faults found. Put card on shelf for 6 months. started troubleshooting again last week and card is totaly dead.
12V rail
5V rail
3.3_AUX and thats it.
1.8V_S5 missing and no other voltages.
I dont have Enable signal for 1.8v
Schematics and boardview attached.
Can any one advice me on what signals should i investigate. ? Thanks.
Comment