Help to identify burnt IC on HP Motherboard L75365-001

samstown

Senior Member

Join Date: Mar 2021

Posts: 122

Country: Switzerland
#1

Help to identify burnt IC on HP Motherboard L75365-001

08-02-2024, 05:49 AM

Hello

I am trying to identify this burnt IC, looks like QFN20. The motherboard is starting for a second then stops. This occured after a lignthing strike in my area.

Thanks

Attached Files
Tags: None
samstown

Senior Member

Join Date: Mar 2021

Posts: 122

Country: Switzerland
#2

08-08-2024, 01:58 AM

Someone helped me on another forum
https://www.ti.com/lit/ds/symlink/tp...dguru.com%252F
Comment
mon2

Badcaps Legend

Join Date: Dec 2019

Posts: 13849

Country: Canada
#3

08-08-2024, 03:02 AM

Thanks. Was going cross eyed on the inverted and flipped close up pic of this ic. Is that a fault of the microscope software?
Comment

Previous template Next

identify this burnt element on ZOTAC GeForce RTX 2060

by fraser34

Hi,

Can anybody, please, help to identify this burnt element on ZOTAC GeForce RTX 2060 6GB 192BIT GDDR6?
It says something like "6UDN..." on it.

Thanks...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
04-28-2025, 10:06 PM
Asus M1403QA R2.0 motherboard Help required to identify HEFA ic.

by jovani1989

Help required to identify ic circled with red in atached, from a Asus M1403QA R2.0 motherboard. No schemathic or boardview available. Seems to be a power suply ic. Thank you!...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
02-22-2025, 02:58 PM
Zotac GTX 260 burnt component - can anyone identify?

by dicky96

Hi guys
This Zotac GTX 260 had a high side MOFET on one Vcore VRM phase short circuit Drain to Gate (Not short Drain to Source)

This has burnt out the drive IC L3E (ADP3110A) and also an SOT-23 device very close to the driver IC. According to the PCB markings 'Dxxx' this is likely to be a diode.

Basically the VRM has 4 phases, two powered from one 6 way connector and two powered from the other 6 way

I would assume each pair of phases are basically identical, the burnt out phase has SOT-23 devices WW1 plus the burnt one.

The good phase...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
12-01-2021, 01:02 PM
Hp 250 g6 burnt IC on the motherboard - is labeled 3h=5g

by Samuel Vincze

Hello, my HP doesn't start, and I found a burnt IC on the motherboard. I can't read the full description due to the damage. The component is labeled 3h=5g. Could someone please advise me where I could buy the component or its suitable replacement? Thank you. It's marked as PUG8 on the motherboard.
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
02-16-2024, 05:53 AM
DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components

by thesame

Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

...
- Channel: Troubleshooting TVs and Video Sources
02-27-2024, 04:31 AM
Loading...
No more items.

Help to identify burnt IC on HP Motherboard L75365-001

Help to identify burnt IC on HP Motherboard L75365-001

Comment

Comment

Related Topics