Foxconn WinFast 6100K8MA recapping advice

[TheSolarShed]

I have a WinFast 6100K8MA motherboard about which I'd like some advice regarding the capacitors. The list of existing caps are as follows:
5x 3300uF 6.3v OST RLX
4x 1500uF 16v UCC KZG
2x 1000uF 10v Teapo SEK
8x 1000uF 6.3v Teapo SEK
9x 1000uF 6.3v OST RLX
1x 470uF 16v Teapo SEK
4x 100uF 16v Teapo SEK

Firstly, the two 10v Teapos only have 5v across them. So they can be grouped under the same capacitors as the 1000uF 6.3v Teapo caps, right?

Secondly, is there a difference between the OST and Teapo 1000uF caps? I know there is in spec, obviously. But what I mean is: Do you think there is a difference in how they have been used, or do you think they just mixed the two randomly? They seem to be general-purpose bypass caps dotted around the board. Can I replace all the 1000uF 6.3v caps with OST RLX equivalents (since they are the higher spec of the two caps)?

Thirdly, the replacements for which I have settled are:
Original: 3300uF 6.3v OST RLX 2780mA 14mOhm
Replacement: 3300uF 6.3v Nichicon HM 2800mA 12mOhm

Original: 1500uF 16v UCC KZG 2550mA 13mOhm
Replacement: 1500uF 6.3v Nichicon HN 2900mA 10mOhm

Original: 1000uF 6.3v OST RLX 1540mA 34mOhm
Replacement: 1000uF 6.3v Nichicon HM 1540mA 25mOhm

Original: 470uF 16v Teapo SEK 310mA ??mOhm
Replacement: 470uF 16v Rubycon YXG 840mA 87mOhm

Original: 100uF 16v Teapo SEK 110mA ??mOhm
Replacement: 120uF 16v Rubycon YXG 340mA 220mOhm

Do you agree with my choices? Pretty much just looking for reassurance. Though the last two replacements are complete thumb-suck choices.

Thanks,
TheSolarShed

[c_hegge]

Re: Foxconn WinFast 6100K8MA recapping advice

Those should all be just fine as replacement caps. As for those 1000uF 10V and 6.3V Teapos, they could also be replaced with the Nich HMs you had in mind to replace the OST 1000uF caps.