ECS P6STMT with OST and G-LUXONS caps

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • davmax
    Badcaps Veteran
    • Dec 2005
    • 899
    #41
    Re: ECS P6STMT with OST and G-LUXONS caps

    Trodas I tried to buy IRF3709ZS from Digikey. They are not stocked and they will not accept a back order. They will not supply.
    Gigabyte EP45-DS3L Ultra Reliable (Power saver)
    Intel E8400 (3000Mhz) Bios temps. 4096Mb 800Mhz DDR2 Corsair XMS2 4-4-4-12
    160Gb WD SATAII Server grade
    Nvidia 8500GT 256Mb
    160Gb WD eSATAII Server grade for backup.
    Samsung 18x DVD writer
    Pioneer 16x DVD writer + 6x Dual layer
    33 way card reader
    Windows XP Pro SP3
    Thermaltake Matrix case with 430W Silent Power
    17" Benq FP737s LCD monitor
    HP Officejet Pro K5300 with refillable tanks

      Comment

      • trodas
        Badcaps Veteran
        • Jan 2006
        • 770
        • Czech republic
        #42
        Re: ECS P6STMT with OST and G-LUXONS caps

        Rainbow - maybe it was the luck of the dumb ones?
        After all, considering the catastrophical failure of these G-LUXONS and killing both mosfets - I should consider myself lucky, that my server is kicking well again


        davmax - well, I hope that until I got any contact in USA/CA willing to help me avoid the customs inferior troubles, Digikey restock these mosfets again
        Or perhaps we can find something even better meanwhile? (read, lower the gate charge)
        "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire
        "I believe that all the people who stand to profit by a war and who help provoke it should be shot on the first day it starts..." - Hemingway my config - my caps

          Comment

          Previous 1 2 3 template Next

          Related Topics

          Collapse
          • momaka
            Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
            by momaka
            I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

            For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

            https://www.badcaps.net/filedata/fetch?id=3591771


            https://www.badcaps.net/filedata/fetch?id=3591772

            It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

            https://www.badcaps.net/filedata/fetch?id=359177...
            03-12-2025, 03:42 PM
          • eryjus
            Heathkit IO-4205 Power Supply Caps
            by eryjus
            Hello,

            First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

            I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

            I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
            ...
            05-10-2023, 11:21 AM
          • Paxman_Swede
            Identifying caps on an old Zoom 9000
            by Paxman_Swede
            Hello!

            I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

            The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

            I have studied the board and...
            01-14-2025, 09:51 AM
          • captain150
            Help with switching power supply caps
            by captain150
            I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
            I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
            03-16-2025, 07:34 PM
          • Foetuss
            Gigabyte GA-6OXT :: caps question
            by Foetuss
            Good evening

            I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
            Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

            But I was also suprised about the bigger boys, which are 330µF 25V.
            Could it be they used 25V caps because they were cheaper / available at that time?...
            02-11-2025, 12:22 PM
          • Loading...
          • No more items.
          Working...