Announcement

Collapse
No announcement yet.

XFX Geforce 6600GT

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    XFX Geforce 6600GT

    Running ca one year, not 24/7, but close too...

    The cap looks very clearly bulged, because you can see the "K" mark, the other caps (in the VRM section) looks fine... What make/model of caps is this? I though solid polymer caps where not supposed to leak??

    Attached Files
    Last edited by Per Hansson; 04-16-2016, 05:52 AM. Reason: Offsite images uploaded due to problems with host
    "The one who says it cannot be done should never interrupt the one who is doing it."
    Tags: None
    #2
    Re: XFX Geforce 6800GT

    well if they have vents they are not polymer. they might be sanyo CV-EX with hybrid cathode electrolyte as this looooong relevant thread suggests

    http://www.xtremesystems.org/forums/...ad.php?t=59391

    capacitor lab yachtmati techmati

    Comment

      #3
      Re: XFX Geforce 6800GT

      Hmm, was looking for the cap on Elfa and found it...

      The "K" vent is visible when they are new...

      But the cap on the card is also clearly bulged, about 2mm I'd say... The cap is 10mm wide and 10,5mm high...

      Thnx for the links... I had read that on the 6800le cards before, the info about the CV-EX caps was not in it then though...

      Attached Files
      "The one who says it cannot be done should never interrupt the one who is doing it."

      Comment

      Previous template Next
      Working...
      X