anyone recapped a hp rp5000

yonu

Senior Member

Join Date: Nov 2007

Posts: 138

Country: United States
#1

anyone recapped a hp rp5000

02-08-2011, 10:11 PM

has anyone recapped a HP rp5000 system I have 2 i need to recap for a client however i cant pull them completely out of service long enough to dismantle the system just to get the cap readings(they are all installed so that you can't read the ratings). So I am hoping someone has recapped one can can give me a list.

Thanks,
Reg
Tags: None

Previous template Next

Understanding capacitor ratings

by Byte_76
Hi, I have some capacitors that I need to replace on a graphics card.

I've attached pictures for reference.

Please help me to understand the ratings so that I can order the correct replacements:

1. G7 560 2.5E - I believe these are for vcore
- Is this 560uF and 2.5V?
- What does the "E" mean?
- Is there any relevance to the "G7"
2. ECX 17 560 2.5V - I believe these are on the memory phase
- Another 560uF at 2.5V?
- This is on the same graphics card. If the caps are rated the same as those above, why are they a different type?
...
- Channel: General Capacitor Questions & Issues
05-10-2024, 07:56 AM
Hola Looking to dismantle and repair a Lenovo Ideapad 300-14ISK Model Name 80Q6. Anyone has a schematic to this?

by Axis937

As title folks.
Looking to dismantle and repair a Lenovo Ideapad 300-14ISK Model Name 80Q6. Anyone has a schematic to this?...
- Channel: Schematic Requests ONLY!
07-21-2024, 05:37 AM
A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair

by howardc64

Problem

This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
- Channel: Troubleshooting Computer Displays
08-04-2024, 10:36 PM
Dell Latitude 5430 LA-L591P Ratings of resistors

by Arkadiy84

Hello. Tell me the ratings of resistors 1 and 2

1 Photo
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
03-16-2024, 03:22 PM
How to read PCB symbol for 6 pin push-pull switch?

by LearningToRepair

Hi!

I am a bit confused how to read PCB markings for 6 pin push pull switch. I had problem with my 6 pin push-pull switch on my UT58A multimeter. It did not lock properly. So I decided to replace it. I forgot the orientation of original button. And now I need some help with understanding PCB.

I learned from google how to identify orientation of push-pull button:

But I am a bit confused which way PCB expects it. I expected that PCB would have some kind on intent marked on it. But mine has 3 marked instead. I attached the photo of it where I marked...
- Channel: General Electronics Technical Discussion
02-24-2021, 04:18 PM
Loading...
No more items.

anyone recapped a hp rp5000

anyone recapped a hp rp5000

Related Topics