how to underfrequency ram on RTX3090 more than in Afterburner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3576
    • slovakia
    #1

    how to underfrequency ram on RTX3090 more than in Afterburner

    how to underfrequency ram on RTX3090 more than in Afterburner?
    I have micron bad series and -500MHz on memroy was not enought to work ok



    best if i can bios mods it so it will stay
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • emil_t
      RTX3090 working fine but fans not spinning
      by emil_t
      Hello guys. I have a problem with a PNY XLR8 GAMING RTX3090 graphics card. The problem is that it displays and works fine, but the fans don't spin at all. The problem occurred when someone else removed the fans in order to clean it and broke one of the fan connectors. He replaced it himself and after that, it wasn't working anymore. I guess he damaged something else in the process. What i have done so far: I found 2 capacitors next to the connector that were in a bad shape, he must have touched them with his tools - they weren't shorted, but i replaced them with similar ones from a similar card....
      04-12-2024, 06:54 AM
    • Nellone93
      Asus Rog Strix RTX3090 Oc
      by Nellone93
      Hello, got cooler liquid on my card and this happened.
      I'd like to try to repair it, and ask if someone can help me with schematic.
      thank you
      1 Photo
      09-04-2024, 02:43 PM
    • Nukes1810
      Dell RTX3090 board view (MSI v388)
      by Nukes1810
      i had to remove some resistors on the back to look for a short and they bounced off the table while looking for its value using a meter, i attached a pic of them, id trake the value of them if any one knows them but if therre is a board view it would be great as well since itll help me trace the short.

      Thank You...
      11-18-2022, 06:36 PM
    • Shanew6969
      Help please with GTX Titan x
      by Shanew6969
      any help would be greatly appreciated..I was gifted a Nvidia GeForce GTX Titan x from a friend...the issue is the card will boot ,will accept drivers run just fine ...but will crash in furmark unless I uncheck full screen and drop settings all the down in afterburner except power stays the same ..if I do that it will run just fine besides temps gets up to around 79 c...I cannot find any useful info or schematics...also I just bought a pcie tester for gpu's it works fine on a good card but I tested this one and here are the results I cannot find info on the tester either..thank you for anyones...
      07-02-2023, 03:41 AM
    • V4Vtwo
      rtx 3090 FTW3 no power
      by V4Vtwo
      have a rtx3090 with no power, can someone tell me if 1.4ohm on PS_NVVDD_DRVON is normal (pin31 on AOZ5311)?
      i checked all the voltage rails and fuses and they seem okay 12v. but i am missing PS_5V_PGOOD
      closest schematic i found is:
      MS_v389
      NVIDIA_GeForce_RTX_3090_600-1G132-0030-300_PG132-A02_Rev_C_

      this is readings from U31
      PS_5V_EN 2.5v
      PS_5V_SW_VCC 5V
      PS_5V_SW_BOOT 9.84v
      PS_5V_PGOOD 0v
      PS_5V_SW_PHASE 5v
      12V_EXT8_F1_RTD3 12v

      thank you
      06-09-2025, 07:27 PM
    • Loading...
    • No more items.
    Working...