Announcement

Collapse
No announcement yet.

GE voluson 730 expert Motherboard no Image

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GE voluson 730 expert Motherboard no Image

    Hello,
    I have the below problem. I open the PC and it starts (CPU fan is working) but I have no image at all (not from the external VGA and neither from the on board VGA). Near to the bios chip there was some blown capacitors so I supose that something was happend with the voltage of the bios chip and the bios program corrupted or am I totally wrong? I replaced the "1" CPU with the "2" CPU and no image again. Also, I measured the CPU supply cable and it has 11,8Volt, but the strange thing is that both CPUs "1" & "2" are absolutely cold and the CPU fan spins (also the VGA chip is cold). All these symptoms are not bios (I can't find this bios... does anyone have it?)?
    Attached Files
    Last edited by SMDFlea; 08-01-2023, 11:41 AM. Reason: Added "GE voluson 730 expert" to thread title
Working...
X