HP ProDesk 600 G6 SSF, 6 long, 3 short beeps

[DianneW]

Hi,

Does anyone know what the 6 long, 3 short beep error code points to on an HP 600 G6 SFF ?

[NanoPat]

Re: HP ProDesk 600 G6 SSF, 6 long, 3 short beeps

Hi.

Cannot find that beepcode listet for troubleshooting on HP website too. Is there a previous story like changed components, was it transportet, bios update attempt etc.? If not happened allready u should try the basic steps.

Unplug PSU, remove CMOS battery, check all components especiall RAM and Graphiccard for proper seating, use only one RAM modul on different DIMMs and unplug all unnecessary peripherals etc.

Is there any changes?

[SMDFlea]

Re: HP ProDesk 600 G6 SSF, 6 long, 3 short beeps

Hi,

Does anyone know what the 6 long, 3 short beep error code points to on an HP 600 G6 SFF ?

Are you sure it isn`t 3 long ,6 short ?

Maintenance and Service Guide - https://cdn.badcaps-static.com/pdfs/...2d9c4bc44f.pdf

HP ProDesk 600 G6 Small Form Factor PC - Part Locator - https://cdn.badcaps-static.com/pdfs/...97a1915e9b.pdf

HP ProDesk 600 G6 Small Form Factor PC - LED Simulator - https://cdn.badcaps-static.com/pdfs/...a99bb6fe48.pdf

[DianneW]

Re: HP ProDesk 600 G6 SSF, 6 long, 3 short beeps

Hi.

Cannot find that beepcode listet for troubleshooting on HP website too. Is there a previous story like changed components, was it transportet, bios update attempt etc.? If not happened allready u should try the basic steps.

Unplug PSU, remove CMOS battery, check all components especiall RAM and Graphiccard for proper seating, use only one RAM modul on different DIMMs and unplug all unnecessary peripherals etc.

Is there any changes?

It's a brand machine, and I've done all the basic troubleshooting, removed cmos battery and storage devices, swapped the PSU, RAM and Processor for known good ones, and the machine is using onboard graphics. I suspect the PCH is faulty.

[DianneW]

Re: HP ProDesk 600 G6 SSF, 6 long, 3 short beeps

Are you sure it isn`t 3 long ,6 short ?

Maintenance and Service Guide - https://cdn.badcaps-static.com/pdfs/...2d9c4bc44f.pdf

HP ProDesk 600 G6 Small Form Factor PC - Part Locator - https://cdn.badcaps-static.com/pdfs/...97a1915e9b.pdf

HP ProDesk 600 G6 Small Form Factor PC - LED Simulator - https://cdn.badcaps-static.com/pdfs/...a99bb6fe48.pdf

It's definitly 6 long and 3 short, not the other way around. Other HP manuals say the code is for a "serious motherboard component failure". I suspect its the PCH, its getting fairly hot when injecting voltage onto the 3.3volt rail.