My Hp prodest 400 g5 having no display with or without ram 3 long beeps and 2 short beeps. many bios tried but the problem is same. please help thanks in advance.
Hp prodesk 400 g5 3 long beeps and 2 short beeps
Collapse
X
Related Topics
Collapse
-
by DianneWHi,
Does anyone know what the 6 long, 3 short beep error code points to on an HP 600 G6 SFF ? -
by harounHDHp 840 g3 no display 3 long beeps with 2 short
Replaced the ram still same
Tried reprogramming the 2 bios chips still same issue -
by xnRSMy asus board doing something strange, didn't saw anything like that before
I get 1 short beep on start... and after five secs i get 1 long and 3 short beeps.
Changing CPU, RAM and GPU didn't gave any results. -
by ZentechI got an HP Elitebook G3 840 which has no video and when I press power button, it is giving me 3 Long beeps and 2 short. Does anyone has this happen before?
I got this info from hp support site
Code:You get a LONG (MAJOR) signal category, RED LED & then a SHORT (MINOR) signal category, WHITE LED. Major – the category of the error; Minor – specific error in that category The AUDIBLE repeats 5 times, and the VISUAL until power is removed. Hardware 3.2 The embedded controller has timed out waiting for BIOS to return from memory
-
by jm942Hi,
My laptop went dead and after checking ,the main 19 volt power rail was shorted. After some checks i could identify that a high side vcore mosfet was shorted.
I replaced the mosfet and now the white powerled is present , fans start spinning but capslock shows the famous 5 long and 3 short code.
I checked the vcore voltages after replacement and i get for all 1.01 V so means for me that the driver is still working of the replaced shorted mosfet. On the Nvidia i measure around 0.8 V after the mosfets.
I did voltage injection on the cpu with 0.7V and i have a current... - Loading...
- No more items.
Comment