Need an SPI/BIOS dump for Ubiquiti U6-LR

[dizzyadam]

Hey guys, I'm hoping someone has a spare U6-LR laying around or one that might possibly be dead for other unrelated reasons but with a potential healthy SPI dump.

Could someone please send a copy of the SPI/BIOS dump of the Ubiquiti U6-LR?

It is the Macronix MXIC MX25L12833F chip located underside of the board next to a big RF shield (presumably wireless chip/radio inside.

Here's a video on how to disassemble one, had to use a hairdryer with a few spudgers.

https://youtu.be/2r2opLCQKlo

Thank you!

P.S. I do have a dump of the UAP-AC-PRO if anyone ever needs it

[dizzyadam]

I've just done some digging and turns out there are 3 different hardware revisions of the U6-LR. I believe I have the V2 and will either need a V1 or ideally a V2 BIOS/SPI dump.

If someone is able to send their SPI flash over, please let me know what the test date code of your U6-LR is (it's the 5 character code next to your MAC address like 2232K for example).

[dizzyadam]

For anyone that needs it - this is for the U6-LR (V2 specifically). The main boot firmware I believe is stored on the the Winbond chip located on the left side - W25Q512JV. The firmware that is stored on the MX25L12833F seems to be something else but I have made a verified backup of both (unit now working - I was unable to verify if Bluetooth radio works since I just adopted straight to my controller rather than app).