IBM 2005-16B SAN Switch Troubleshooting

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • liyunyu
    New Member
    • Feb 2012
    • 4
    • USA
    #1

    IBM 2005-16B SAN Switch Troubleshooting

    I wish to know if there is any way to troubleshooting or reset the IBM 2005-16B SAN switch to its factory default.

    The switch is out of warranty. When turned on, both signal light on the front pannel indicating that it is under normal condition.

    However, we can not get to its control pannel via either Ethernet port or serial port. The java client will get time out if connected via LAN wire. The serial port never response to any calls from the hyper terminal.

    The manual did not provide any reset instructions.

    Thanks,

    Leon
    Tags: None
    • NxB
      Badcaps Legend
      • Feb 2009
      • 1595
      #2
      Re: IBM 2005-16B SAN Switch Troubleshooting

      Monitor it with wireshark. See if any packets come out.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) V 10 Specification for Upgrade or Repair
          by Document Archive
          This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
          09-06-2024, 05:30 AM
        • Natob82
          Micro Momentary Push Switch?
          by Natob82
          Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I...
          12-21-2022, 05:22 AM
        • grimacelord
          NEC TurboExpress On/Off Power Switch Replacement Help
          by grimacelord
          Hello,

          I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.

          I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.

          I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need....
          11-09-2023, 09:49 AM
        • SluggerB
          Help making a switch work the opposite way with a relay
          by SluggerB
          I have a very small float switch, I'm using in a very small tank. It only fits in one way. Link https://www.amazon.com/uxcell-Switch.../dp/B07DZ1J2GB

          I want the switch to be open when the water is high, and closed when the water is low. Unfortunately it works the opposite. And since this switch is designed to be underwater, it's all sealed up, there is no taking it apart or hacking it up.

          It will be driving a water pump, basic idea, when the water is low, switch closes, which turns on water pump, when enough water is in the tank, float switch floats,...
          02-07-2025, 07:57 PM
        • Powderfanupnorf
          Dell AL440LX power on switch circuit help required
          by Powderfanupnorf
          Hi Everyone. First official post so fingers crossed I conform and also manage to get photos to work.

          So I am requesting some help from anyone who happens to have one of these motherboards to hand and perhaps a multimeter.

          My board has a single row of header pins for all the front panel stuff (have seen others where they are grouped together differently so thats no help) and the two pins for the power on switch had been previously repaired and I am trying to make a better repair. There looks to be pad and trace damage and im happy to relocate the header pin/pins to...
          13 Photos
          06-24-2024, 01:24 PM
        • Loading...
        • No more items.
        Working...