TPLINK TL-MR3420 v5.0 dump

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • corona100
    Senior Member
    • Mar 2020
    • 145
    • U.S.A
    #1

    TPLINK TL-MR3420 v5.0 dump

    Hello guys i need a dump for TPLINK TL-MR3420 v5.0 i didn't find any dump for this model s/n 22117J3004396

    if someone have vinafix access this is the link https://************/threads/tl-mr3420-v5.45973/
    Last edited by corona100; 02-17-2023, 08:06 AM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • beal
      TPLINK TD-W9970(EU) Dump
      by beal
      hi

      Please bios dump Tplink TD-W9970(EU) Ver 2.0
      bios : 25Q64

      thanks​
      12-26-2024, 01:10 AM
    • corona100
      TPLINK TL-WA901ND REV 5.0 Dump
      by corona100
      i have a bios problem with router after try update from navigator i have an electricity shutdown now this router start and shutdown i need pleas a dump
      this is my damaged dump...
      07-28-2024, 12:23 PM
    • Habble7
      I need a BIOS dump for the Samsung S49CG934SU monitor
      by Habble7
      The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

      Suspected Cause:
      I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

      Troubleshooting Attempts:
      ...
      05-22-2025, 07:28 AM
    • Andreas_de
      Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
      by Andreas_de
      Hello!

      i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
      Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

      Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
      ...
      2 Photos
      04-12-2025, 10:38 AM
    • re-atari
      Anycubic Photon 5.5 3D printer 25Q32 flashrom dump needed
      by re-atari
      Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.

      Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...
      02-03-2025, 06:49 PM
    • Loading...
    • No more items.
    Working...