Need a flash dump for TP-Link RE450 v3

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • img1
    Member
    • Aug 2015
    • 16
    • Earth

    #1

    Need a flash dump for TP-Link RE450 v3

    Hi!

    I'm searching for TP-Link Range Extender RE450 v3 EPROM dump. Preferably with the 2019 fw version on it, but any version welcome.

    File size: 8 388 608 bytes.

    Thanks for further!

Related Topics

Collapse

  • hinisa
    Xiaomi router freezes at boot after re-capping
    by hinisa
    I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

    When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

    After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



    Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
    07-08-2023, 05:58 AM
  • kooroshi60
    Traktor Kontrol S4 MK1 Flash dump
    by kooroshi60
    Hi guys
    I need the Flash Dump (.bin) file of the Traktor Kontrol S4 MK1. SPI chip number is 25DF041A from Atmel (4Mbit)
    So please let me know if you have the .BIN Dump of this model and its price and the payment method.
    I appreciate your help.
    10-01-2024, 10:17 AM
  • bamdad61
    Canon DR-1210C flash dump request
    by bamdad61
    Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.
    04-15-2025, 02:43 PM
  • beal
    TPLINK TD-W9970(EU) Dump
    by beal
    hi

    Please bios dump Tplink TD-W9970(EU) Ver 2.0
    bios : 25Q64

    thanks
    12-26-2024, 01:10 AM
  • corrize
    Nikon D800 camera - flash don’t work and capacitor don’t charge
    by corrize
    Hello, I'm stuck in troubleshooting…
    The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

    In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
    When I press the flash button, it's detected by the system, flash icon appear on LDC display....
    10-01-2022, 10:02 AM
  • Loading...
  • No more items.
Working...