Hi.
Motherboard model R0171-2281-0122.
I need dump for SPI W25X41CLSNIG.
My monitor is not powering on.
Thanks.
Motherboard model R0171-2281-0122.
I need dump for SPI W25X41CLSNIG.
My monitor is not powering on.
Thanks.
-
Gigabyte G1 Assasain motherboard Bios IC model needed !
Bios ic fried and I cant read the model on top.
Thanks ! -
Hello everyone,
I need the schematics for the motherboard DA00GIMB6H0 Rev : H. It's a HP Chromebook x360. Thanks for your help.
Have a nice day.
Sincerely,
ME06-09-2025, 02:40 AM -
The tv turns on the standby led when plugged, the power button does nothing, power button checked with the multimeter and its working ok.The board model is 5851-A7M25G-0P00 VER00.02 . If someone can help with the firmware i would really apreciate....09-16-2024, 08:54 AM
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...