Hi there,
got this monitor that looks great cosmetically, but no life. After a bit of a struggle, I opened it up. I am getting 160 V across large cap. No voltages on the connector that goes to main board. If this is anything like TVs, I'd expect some standby voltage to the main board.
I am not familiar with this power supply board 4H.17B02.A00
I found an IC that's close to the mainboard connector, thinking it might be the standby regulator. Has the folowing numbers on it
101058
1T10231
No luck with any datasheets on this.
help!
got this monitor that looks great cosmetically, but no life. After a bit of a struggle, I opened it up. I am getting 160 V across large cap. No voltages on the connector that goes to main board. If this is anything like TVs, I'd expect some standby voltage to the main board.
I am not familiar with this power supply board 4H.17B02.A00
I found an IC that's close to the mainboard connector, thinking it might be the standby regulator. Has the folowing numbers on it
101058
1T10231
No luck with any datasheets on this.
help!
Comment