envision en7100si

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 370forlife
    Large Marge
    • Aug 2008
    • 3112
    • United States
    #1

    envision en7100si

    Got bad Hermei caps everywhere, and presumably bad c5706's, 4 of them. The PCB under them are very dark. Having a hard time finding replacements, and need to find them locally (kalamazoo, michigan)

    Also, he wants the caps locally, so I don't know anyone locally who has good brand caps, except for me.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • dfranks
      AOC Envision 24" monitor with Yellow tinge
      by dfranks
      Hi everyone. I have an AOC(?) Envision 24" computer monitor, model TFT24W90PS, Product name G416. Its worked fine for years but now has a yellow tinge on the screen. I tried various adjustments via the monitor controls but no good. I swapped the monitor with another to see if it was the video card or video cable but other monitor looks fine.
      I have it apart right now looking at the boards. I have replace the electrolytic capacitors on the inverter board but still same problem. All of the electrolytic caps on the power supply (and inverter board) visually look ok, no bulges or leaks....
      10-04-2020, 10:28 AM
    • Thermaltake
      Capacitor nominal value
      by Thermaltake
      Hi, happy new year!

      I am buying capacitors locally and from ebay. Some capacitors locally and on ebay are sometimes rated more than their value, I know there is plus minus 20% offset, but is it true that if capacitor is lower than rated let's say cap. is rate as 3300uF, and 10 of capacitors that I bought are around 3000uF, is that consider an old capacitors that were stored for longer period even if they weren't solder before ? Would that kind of capacitor last same as the one that should be rated as their original value or a bit more. And would they perform same ?

      I...
      01-04-2025, 01:24 PM
    • chriska416
      Envision L32W761
      by chriska416
      I have an Envision L32W761 TV with a broken LCD screen. The TV powers on, and I want to repurpose it as a light. I've removed mostly everything, but I am unable to figure out how to bypass the main board. I don't which pin controls the power-on function of the power supply board, part number 24200E4P (not labeled well).

      The wires on the left go to the backlights.

      The wires on the right go to the main board.
      Pins 1 & 2 - marked 15V, but not used
      Pins 3 & 4 - marked 12V, measure
      Pins 5 & 6 - marked 5V, measure 5.3V
      ...
      08-17-2018, 07:37 AM
    • ahmarzo
      Acer TMX314-51 laptop battery problem
      by ahmarzo
      I have acer laptop tmx314-51 with part no 6050A3020501.
      The laptop is working fine on adapter and battery is also charging and when adapter is disconnected in on state the laptop gives backup on battery and gives good backup.
      But when laptop is powered on through battery only the laptop does not power on and there is 0 voltage on battery connector.
      I have not not tried another battery as it is not available locally could this be a battery problem.have checked discharging mosfet and there is no shorting to ground on any pin of battery connector.
      The schematic is not available...
      04-11-2025, 09:14 AM
    • Document Archive
      Acer TravelMate 6490 6492 6492G Laptop Schematic
      by Document Archive
      Acer TravelMate 6490 6492 6492G Laptop Schematic
      Inventec MICHIGAN Rev A02...
      10-31-2024, 04:10 AM
    • Loading...
    • No more items.
    Working...