Monitor Dell U2913WM - No OSD, No input selection

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CornholioGSM
    Badcaps Veteran
    • Feb 2014
    • 261
    • CZECH
    #1

    Monitor Dell U2913WM - No OSD, No input selection

    Hello,
    i need help.
    I have saved from scrap widescreen monitor dell u2913WM. Monitor powers on normally, but problem is that i am not able to enter OSD menu and Input selection. Tested with HDMI and DVI signal, but still no picture. After power on i can see only logo and then nothing ...and monitor goes to sleep mode.

    Can anyone help me ? ... or is needed to buy another mainboard?

    thx
    Tags: None
    • alexa11
      New Member
      • Dec 2018
      • 2
      • uk
      #2
      Hi,i have same problem like you,did you resolve?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Bowline
          Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
          by Bowline
          My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

          Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

          My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
          The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
          I have tried multiple different Dell power adapters. My Dell...
          06-11-2025, 10:13 AM
        • DanPoka
          Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
          by DanPoka
          I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
          Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
          This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
          02-15-2025, 05:05 AM
        • momaka
          HannStar Hanns-G HC194d LCD monitor repair
          by momaka
          Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
          03-15-2023, 10:17 PM
        • Jesus Coder
          Issues Reviving Old Dell 2408WFPb Monitor
          by Jesus Coder
          Hello everyone,

          I have been having some difficulties reviving an old Dell 2408WFPb PC monitor that I received for free. When I first acquired it, the backlights of the display were on but alas no image was showing. After extensive research on the topic, I went ahead and purchased a new t-con board for the monitor. After installing the board, I was then presented with a new screen that was half black and half green (more so black). I have been unable to figure out what to do next as I have limited knowledge of display electronics. Might anyone on this forum have an idea of what may...
          06-25-2023, 02:33 PM
        • Aezakmi
          Dell 2408 - No OSD or input menu
          by Aezakmi
          Hello,

          A few days ago my Dell 2408 has stopped to working without any noticeable sign.
          It can be power on, power light stays green, backlight works but there is no OSD, menu input, Dell logo etc. It happens if there is some input source connected or not.
          I disassembled the case but I didn't see any failures on the board. The only element that looked suspicious was L6561 - there was some brown dirt under it. So I replaced this IC but it changed nothing.

          What else should I checked or is this repair even possible/worthwhile?

          Thank you for your c...
          9 Photos
          01-29-2024, 04:12 AM
        • Loading...
        • No more items.
        Working...