need firmware sumsong bw1953

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • boyebaran
    Badcaps Veteran
    • Sep 2015
    • 247
    • iran
    #1

    need firmware sumsong bw1953

    hi to all
    need this firmware:
    sumsung syncmaster BW1953

    type no:AQ19WS
    PART NO MAIN:BN41-00877A
    IC FLASH=IC201:MX 25L100
    IC EEPROM=IC203:24C08
    tnx
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • titomno2
      Surface Pro 7 type 1866 PD controller firmware issue
      by titomno2
      Hi guys,

      Hope you are fine.
      I'm struggling to fix a small issue with one of the tablet Surface Pro 7 type 1866 i'm fixing (windows 11).
      The boot time is so long (up to 5-10 minutes).
      After several attempt I finally find one thing is not right (PD controller firmware is 0.0.0 it can't update to 3.6.1) under device manager I have a yellow mark, code 14 and error as decribed on picture attached.
      I don't find any information regarding the error code 0x1803 (and sometimes it change to 0x1804.
      In the past I have found that if the update is a success, the boot...
      2 Photos
      04-27-2025, 01:02 AM
    • electronx
      Questions About USB 3.2 Gen 2x2 and USB4 Designs: Type-A vs Type-C, MUX Requirem
      by electronx
      Hi everyone,

      I’m currently learning about the USB protocol and designing a project, but I’ve encountered a few questions that I couldn’t find clear answers to. I’d really appreciate your input!

      1. USB 3.2 Gen 2×2 with SuperSpeed Type-A Connector
      According to the USB 3.2 specification, it states that USB 3.2 Gen 2×2 can support a SuperSpeed Type-A connector. This raises a question:

      If we use a SuperSpeed Type-A connector, the system would only utilize 1 lane for data transfer, leaving 1 lane from the host unused. Is this configuration valid,...
      06-26-2025, 03:27 AM
    • sikocan
      Lenovo X1 Carbon 9th Gen Black Screen
      by sikocan
      I believe Chip 2 is BIN is the main one as it contained the Windows product key, marked with XXXXX for now.

      SN: PF3G1REP
      MODEL: 20KW-00J1AU

      PROBLEM: Turns on blank screen, charging circuitry motherboard looks good. I have tried another firmware here - but resulted in 5V will not go to 20v due to different PD firmware I believe - using the current firmware it does go to 20V.

      Requesting a firmware clean/BIOS region cleaned. Here is output from ME Analyzer:
      ╔═══════════════════════════════════════════╗...
      06-24-2025, 09:01 PM
    • Mr.heinrich
      Bios Firmware for printer HP Deksjet 3835, Board type F5R96-60004
      by Mr.heinrich
      Greetings, i just have a problem with printer HP deskjet 3835, this printer using F5R96-60004 board. Can you guys help me to get bios firmware that support for this type. i have searching this bios firmware at google but i can found it. help me plz. thanks.
      06-07-2024, 08:17 AM
    • Document Archive
      HP Victus Gaming 16-s0500sa Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP Victus Gaming 16-s0500sa Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 16-s0500sa boardview and 16-s0500sa schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-07-2024, 07:19 AM
    • Loading...
    • No more items.
    Working...