LG LM270wq1 Schematics or BOM

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • afourtrackmind
    Member
    • Nov 2013
    • 10
    • Cananda

    #1

    LG LM270wq1 Schematics or BOM

    Hello

    I'm trying to identify a part for replacement. Im wondering If anyone might be able to help me.

    I have spent many hours troubleshooting this display finding it be a bad solder joint. In the process of swapping like bits around, Ive damaged a part and need to identify it so I can order a replacement if possible.

    If anyone has a schematic or a BOM of this module, I'd love a copy please.

    The board identifier is 'OP1' in this case. I assume its an Op Amp, but could very well be a Optocoupler.

    The number on the top of the component is "7822 P932"
    google doesn't return a definitive result. I found what would could be it, a single channel but the pins don't test as the part should.

    its an 8 pin SOT (i think). Smaller than an SOIC 8. Very small DIP SMD.

    This is on one of the boards that connect directly to the LCD, and after the t-Con board. Im not sure what to call these guys, any thoughts? Whats interesting is it carries the same board number as the T-con board or board series. It unique PN from LG doesn't return any results.

    The board is PN- 68750S-0921A EVT2
    or 68750S-0922A EVT2

    The T-con board number that google is returning results is 94V-0E88441

    Any leads or help would be greatly appreciated.
    Thank you
    aftm
    Attached Files
  • STUARTDEAN67
    New Member
    • Jul 2024
    • 1
    • England

    #2
    HOPE THIS HELPS
    Attached Files

    Comment

    Related Topics

    Collapse

    • Hakuu
      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
      by Hakuu
      Hi There,

      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

      More Details

      TV Model - LG OLED77G1PUA

      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
      07-12-2023, 02:37 PM
    • advant
      Driving a Sharp TCON/panel with a universal main board
      by advant
      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
      02-03-2020, 12:25 AM
    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • howardc64
      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
      by howardc64
      Problem

      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
      08-04-2024, 10:36 PM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • Loading...
    • No more items.
    Working...