Monoprice IPS-ZERO-G backlight works, but no display

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom`
    New Member
    • Oct 2012
    • 5
    • US

    #1

    Monoprice IPS-ZERO-G backlight works, but no display

    Monitor is 2.5 years old. Pressing the power button results in the backlight turning on, but nothing appears on the display and the monitor goes to standby after a few seconds, just as though no video cable is plugged in. (But also the little "Input" box doesn't appear on the screen as it normally does if no input is connected.) The capacitors look fine.

    Any ideas?
    Attached Files

Related Topics

Collapse

  • DanPoka
    Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
    by DanPoka
    I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
    Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
    This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
    02-15-2025, 05:05 AM
  • amuse619
    Asus G15 5980HX - 6800M - No Display on Laptop - HDMI/Display Port external monitor works fine. Fried Component.
    by amuse619
    Hello!
    Looks like I fried something when my EDP cable got squeezed on the hinge. I replaced the cable but still no display. Laptop works fine with external monitor connected through HDMI and Display Port-USB C port. I took it apart and I see a burnt component. Can anyone help me identify what this component is? I tried to use schematics for another G15 but it does not match on the amount of pins and size. I attached pictures. The component has a label on it - (21A29)

    Laptop is a Asus G15 Advantage Edition 2021 Laptop Ryzen 9 5980HX - 6800M...
    08-14-2024, 01:22 PM
  • webhx
    820-00134-A iMac 27" Late 2015 - No display, backlight works
    by webhx
    Hello
    I received 27" iMac, Late 2015 model that's broken. I don't know what exactly happened but it appears to be unopened and there are no marks indicating prior repair attempts.
    Initially it didn't display anything on the screen and backlight didn't work. Only 2 diagnostic LEDs would light up and 3rd was very faint. I opened it and found F4400 fuse near eDP connector to be blown. Replaced it with a suitable part and backlight came back to life. Unfortunately it still doesn't display anything on the screen. Now I get 4 green diagnostic LEDs.

    I can hear the chime...
    01-29-2023, 11:00 AM
  • signal.quest
    Panasonic LED TV TC-40A420U - Replaced Backlight LEDs but now no image/display or garbled
    by signal.quest
    I have a Panasonic LED TV TC-40A420U. The TV was given to me as an attempt to fix or throw out. I replaced the Backlight LEDs and now the screen lights up, but there is no image/display. If I play with the up/down buttons I can get the display to change from black to garbled. I can't get sound from HDMI but not sure of what input is selected. I have no remote control. When I connect a laptop to the HDMI ports it recognizes a Panasonic TV for display and sound output but I can't see or hear anything through the TV. This makes me think the mainboard is OK, but not sure if mainboard can...
    03-17-2024, 10:14 AM
  • turmix
    AOC U34G3XM, new monitor, black screen with backlight on, possible shortcircuit during dissassembly
    by turmix
    Hello, I'm working on a new deskmod pc project and have a problem with my monitor, an AOC U34G3XM, well, I may have bricked it.

    The monitor was dismanteled and the separate parts parts integrated in the desk. the screen panel alone is on the upper part, and main board/video board + power board on the back of the desk (not enough place on the cover to fit it)
    At first everything was working smoothly, then I decided to change the connexion between the video board and the screen for a longer one. Still working fine

    During another reassembly, I made a mistake, and...
    01-29-2024, 03:48 AM
  • Loading...
  • No more items.
Working...