I was recently given an ASUS VE284H 24" LED monitor do to the right half of the screen being discolored and distorted. Does anyone have an idea as to what could be wrong? I have already opened it up and can not find any components that look bad visually. I have attached a picture of the problem. At first I thought it may have been the green pixels stuck on so I set it in burn in mode for a couple hours which did not help. I also tried some of the "pixel repair" videos on youtube which did not seem to help, but a couple seconds after i exited chrome the discoloration corrected itself and it worked properly for almost 24 hours. After rebooting my pc, the problem was back. I will attempt to get more pictures if it may help.
ASUS VE248H half of screen discolored
Collapse
X
Related Topics
Collapse
-
by ChrissygizmoHello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same... -
by RudolflHi all
This one is a bit strange. Never saw problem like this before. Picture is shifted half screen. See photo.
My gut feel tells me it is the panel. Am I right?
Rudolf... -
by Ryan.manHello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
by valvashonThe 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it... -
by Raulnngood night! I have this screen that looks half black and half white. the tcon gives a low vgh value (5-6v). the rest seem fine. I first removed the flex from one half of the panel and then the other. Removing the left, vgh increases it to 25-26v. I think the problem is in that area, but there are not many elements on the integrated controller board. there are no shorted capacitors. could they be a cof? Some help?
By the way, now the entire screen is black. Maybe some flex was not connected correctly... I have exchanged the flex and there are no variations, I don't think they are the... - Loading...
- No more items.