Hello all
I have a al 1916w with an 3"bar on the bottom duplicating the top of screen
power supply caps tested good on a ESR meter, mainboard had 1 bad 4.7uf 50v cap replaced it. I also tried another LVDS cable and two other test screens
same problem I assume it's the mainboard or that I am not using a wide screen for testing. original screen was cracked and not working.
I have a al 1916w with an 3"bar on the bottom duplicating the top of screen
power supply caps tested good on a ESR meter, mainboard had 1 bad 4.7uf 50v cap replaced it. I also tried another LVDS cable and two other test screens
same problem I assume it's the mainboard or that I am not using a wide screen for testing. original screen was cracked and not working.
Comment