Thinkvision P27h-10 Monitor Backlight

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Adubey
    Member
    • Oct 2020
    • 21
    • Canada
    #1

    Thinkvision P27h-10 Monitor Backlight

    Hi All, I am looking for the specifications of LEDs used in backlight of this monitor. By measurements looks like its a 4014 LED however I wanted to know what is the forward voltage and the warmth of the LEDs used here. From Aliexpress and datasheet of the mfg I can see that they make them in 3V and 6V variations. and 3000K 4000K 5500K 6000K 9000K in warmth rating.

    Any help will be appreciated.

    Thanks


    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Document Archive
      LENOVO ThinkCentre M710 + ThinkVision T23i 23" Full HD IPS monitor ThinkCentre M i5-7400 Specification for Upgrade or Repair
      by Document Archive
      This specification for the LENOVO ThinkCentre M710 + ThinkVision T23i 23" Full HD IPS monitor can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ThinkCentre M710 + ThinkVision T23i 23" Full HD IPS monitor boardview and ThinkCentre M710 + ThinkVision T23i 23" Full HD IPS monitor schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional...
      09-12-2024, 01:58 PM
    • DanPoka
      Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
      by DanPoka
      I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
      Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
      This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
      02-15-2025, 05:05 AM
    • Zilicon
      NEWSYNC B27F165 MONITOR HAS NO BACKLIGHT. board no: JY85QS_UPH_LS_R10.3
      by Zilicon
      Greetings everyone.
      Please I need help with the above monitor.

      Below is the summary of what happened and what I have done:

      The monitor started by turning off 2 seconds after it was turned on. It displayed with a backlight when it turned on. However, the standby light remains on after it is turned off on its own, I have to press the power button again to turn it on, but it will go back to standby after 2 seconds.

      The backlight driver IC is 0b3350cp.

      I applied a 370k SMD resistor on the CMP pin which is pin 6, while the other...
      11-07-2023, 09:12 AM
    • momaka
      HannStar Hanns-G HC194d LCD monitor repair
      by momaka
      Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
      03-15-2023, 10:17 PM
    • turmix
      AOC U34G3XM, new monitor, black screen with backlight on, possible shortcircuit during dissassembly
      by turmix
      Hello, I'm working on a new deskmod pc project and have a problem with my monitor, an AOC U34G3XM, well, I may have bricked it.

      The monitor was dismanteled and the separate parts parts integrated in the desk. the screen panel alone is on the upper part, and main board/video board + power board on the back of the desk (not enough place on the cover to fit it)
      At first everything was working smoothly, then I decided to change the connexion between the video board and the screen for a longer one. Still working fine

      During another reassembly, I made a mistake, and...
      01-29-2024, 03:48 AM
    • Loading...
    • No more items.
    Working...