Anyone removed a Syncmaster Touch Panel from the bezel? (S24B300EL)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 2andrewd
    Member
    • Mar 2012
    • 41
    • us

    #1

    Anyone removed a Syncmaster Touch Panel from the bezel? (S24B300EL)

    If anybody has any experience be it success or failure it would be great to here about your encounters before i risk damaging the touch menu pcb on this S24B300EL pulling it out incorrectly.

Related Topics

Collapse

  • nubinator
    what to use to stick panel with no bezel
    by nubinator
    Im fixing my first tv that has no bezel holding the panel in just some sort of double sided tape, its a samsung q6f. was suprisingly easy to to take the panel out with a bent razor blade (thanks forum!) but i wanted to know what other people use to stick it back and could i use b7000 glue instead ?
    07-31-2023, 06:06 AM
  • Prott
    Surface Pro 4/5 - no touch after LCD change
    by Prott
    Hello,
    I have a question that's driving me a bit nuts recently.

    Is the touch board on Surface Pro 4/5 somehow married to the motherboard? I have a few Surfaces that, after the touch board change, lost all touch functionality.

    - I tried flashing the bios (simple ME clean from a known good bios, previous bios didn't have an intergrated hub enabled), reinstalling firmware, reinstalling windows and even new touch boards.
    - In one instance, after I tried to troubleshoot by using a known good screen + touch pcb combo on a Surface that lost touch, the touch board...
    01-25-2023, 12:42 PM
  • howardc64
    LG 49UJ6500 LCD panel lighter band that goes away
    by howardc64
    49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

    Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
    02-19-2023, 12:13 AM
  • triplefour
    SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
    by triplefour
    TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

    tcon is built into mainboard.
    Only one cable goes to panel boards.
    there is a cable from one panel board to the other that links them.
    cost cutting measure that results in us having harder time to diagnose.
    removing the link to the second panel board allows TV to stay on with stable backlight but no image.
    used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
    07-28-2022, 07:59 PM
  • Storyteller12
    QN55Q60R Service Menu Panel Help
    by Storyteller12
    I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

    I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

    I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

    the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
    01-13-2024, 01:57 PM
  • Loading...
  • No more items.
Working...