216BW caps list

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Blargh523
    Member
    • Dec 2012
    • 46
    • USA

    #1

    216BW caps list

    I'm looking to replace some caps in a couple of "delayed/flickering turn-on" 216BW's, and I'd like to make sure I'm ordering the right parts.

    So far, this is my Mouser parts list:

    2.2uF 50v -- EEU-EB1H2R2S, 5x11mm
    22uF 50v -- EEU-FR1H220, 5x11.5mm
    47uF 63v -- EEU-FR1J470, 6.3x11.2mm
    330uF 25v -- EEU-FR1E331, 8x11.5mm
    820uf 25v -- EEU-FR1E821 (X5), 10x20mm

    The 2.2 wasn't available in the FR series, but the EB series is long-life (5000 to 10000 h). From what I've read, the smaller caps might not need replacing, but I'm doing it anyways since I'll have the monitors apart anyways and it's only a handful of change more.

    And yes, there are other threads on the 216BW, but being new, I'm not sure which is considered worse here -- starting a redundant thread or necro-posting/hijacking.
    Last edited by Blargh523; 12-15-2012, 08:39 PM. Reason: Added disclaimer.
  • Phaihn
    Badcaps Veteran
    • Jan 2009
    • 842
    • Canada

    #2
    Re: 216BW caps list

    its normaly better to make your own thread for something your working on you did it right.

    edit also you can try digikey if mouser doesnt have what you need.
    www.digikey.com or www.digikey.ca
    My Computer.
    AMD APU A4-3300 2.5ghz 1mb cache
    Motherboard GigaByte GA-A75M-S2V
    Kingston HyperX Blue DDR3 8GB (2x4GB)

    SB Audigy 2 ZS [B800] Sound Card
    500GB WD Caviar® Blue™
    1 Terabyte WD Caviar® Black™
    2 Terabyte WD Caviar® Black™

    Comment

    • redwire
      Badcaps Legend
      • Dec 2010
      • 3900
      • Canada

      #3
      Re: 216BW caps list

      That looks fine - I'm using those same caps and have no problems. The 820uF's were not in stock so I used Nichicon UHV1E821MPD, and for the 2.2uF's UPW1H2R2MDD. Take pics and write down the caps, I got distracted and forgot where a couple went

      The IP-43130A power supply board is used in several Samsung monitors (205BW, 206BW,223BW,216BW, 226BW, G22W)

      Comment

      • Phaihn
        Badcaps Veteran
        • Jan 2009
        • 842
        • Canada

        #4
        Re: 216BW caps list

        also just for the hell of it you could post some pictures.
        normaly as long as you got the same ratings on the new caps it will work on not super informed of the series stuff still ive bean told fr or fm series before i think and on monitors you could go with panasonics whitch sounds like your allready doing that.
        My Computer.
        AMD APU A4-3300 2.5ghz 1mb cache
        Motherboard GigaByte GA-A75M-S2V
        Kingston HyperX Blue DDR3 8GB (2x4GB)

        SB Audigy 2 ZS [B800] Sound Card
        500GB WD Caviar® Blue™
        1 Terabyte WD Caviar® Black™
        2 Terabyte WD Caviar® Black™

        Comment

        • Phaihn
          Badcaps Veteran
          • Jan 2009
          • 842
          • Canada

          #5
          Re: 216BW caps list

          Originally posted by redwire
          That looks fine - I'm using those same caps and have no problems. The 820uF's were not in stock so I used Nichicon UHV1E821MPD, and for the 2.2uF's UPW1H2R2MDD. Take pics and write down the caps, I got distracted and forgot where a couple went

          The IP-43130A power supply board is used in several Samsung monitors (205BW, 206BW,223BW,216BW, 226BW, G22W)
          i always like to work on all the same ones at a time i dont like to remove everything at one time other wise ill forget whare stuff goes.
          My Computer.
          AMD APU A4-3300 2.5ghz 1mb cache
          Motherboard GigaByte GA-A75M-S2V
          Kingston HyperX Blue DDR3 8GB (2x4GB)

          SB Audigy 2 ZS [B800] Sound Card
          500GB WD Caviar® Blue™
          1 Terabyte WD Caviar® Black™
          2 Terabyte WD Caviar® Black™

          Comment

          • Blargh523
            Member
            • Dec 2012
            • 46
            • USA

            #6
            Re: 216BW caps list

            Originally posted by Phaihn
            edit also you can try digikey if mouser doesnt have what you need. www.digikey.com or www.digikey.ca
            I usually go with Mouser for better pricing on lower-volume stuff.

            Originally posted by Phaihn
            also just for the hell of it you could post some pictures.
            Unfortunately, I don't know where my good camera is at the moment and the grainy pics my junk cell-phone ones takes won't do anyone any good.

            Originally posted by Phaihn
            normaly as long as you got the same ratings on the new caps it will work on not super informed of the series stuff still ive bean told fr or fm series before i think and on monitors you could go with panasonics whitch sounds like your allready doing that.
            Yeah, those are all Panasonic caps.

            Originally posted by Phaihn
            i always like to work on all the same ones at a time i dont like to remove everything at one time other wise ill forget whare stuff goes.
            Fine-point Sharpie is my friend for that -- either for part values or for making sure cables go back in the right place.
            Last edited by Blargh523; 12-15-2012, 09:57 PM.

            Comment

            • Phaihn
              Badcaps Veteran
              • Jan 2009
              • 842
              • Canada

              #7
              Re: 216BW caps list

              Originally posted by Blargh523
              I usually go with Mouser for better pricing on lower-volume stuff.



              Unfortunately, I don't know where my good camera is at the moment and the grainy pics my junk cell-phone ones takes won't do anyone any good.



              Yeah, those are all Panasonic caps.



              Fine-point Sharpie is my friend for that -- either for part values or for making sure cables go back in the right place.
              My Computer.
              AMD APU A4-3300 2.5ghz 1mb cache
              Motherboard GigaByte GA-A75M-S2V
              Kingston HyperX Blue DDR3 8GB (2x4GB)

              SB Audigy 2 ZS [B800] Sound Card
              500GB WD Caviar® Blue™
              1 Terabyte WD Caviar® Black™
              2 Terabyte WD Caviar® Black™

              Comment

              • Blargh523
                Member
                • Dec 2012
                • 46
                • USA

                #8
                Re: 216BW caps list

                Mouser is out of the 330uF,25v in the FR Series
                I'm probably going with one of these:

                Nichicon UHD1E331MPD 8x15mm
                Panasonic EEU-FM1E331L 8x15mm

                In other news, yes they have CapXon's in them -- all of the 620's and 330 are swollen.
                Last edited by Blargh523; 12-16-2012, 05:41 AM.

                Comment

                • Blargh523
                  Member
                  • Dec 2012
                  • 46
                  • USA

                  #9
                  Re: 216BW caps list

                  Got my shipment from Mouser yesterday, first patient is done, up and running. I forgot how bright these monitors are when they're working right

                  I'll do the other one tomorrow.

                  Side note: Went with the Nichicon UHD1E331MPD 8x15mm for the 330uf caps.

                  Comment

                  Related Topics

                  Collapse

                  • momaka
                    Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
                    by momaka
                    I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

                    For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

                    https://www.badcaps.net/filedata/fetch?id=3591771


                    https://www.badcaps.net/filedata/fetch?id=3591772

                    It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

                    https://www.badcaps.net/filedata/fetch?id=359177...
                    03-12-2025, 03:42 PM
                  • eryjus
                    Heathkit IO-4205 Power Supply Caps
                    by eryjus
                    Hello,

                    First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                    I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                    I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                    ...
                    05-10-2023, 11:21 AM
                  • Paxman_Swede
                    Identifying caps on an old Zoom 9000
                    by Paxman_Swede
                    Hello!

                    I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

                    The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

                    I have studied the board and...
                    01-14-2025, 09:51 AM
                  • captain150
                    Help with switching power supply caps
                    by captain150
                    I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                    I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                    03-16-2025, 07:34 PM
                  • Foetuss
                    Gigabyte GA-6OXT :: caps question
                    by Foetuss
                    Good evening

                    I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
                    Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

                    But I was also suprised about the bigger boys, which are 330µF 25V.
                    Could it be they used 25V caps because they were cheaper / available at that time?...
                    02-11-2025, 12:22 PM
                  • Loading...
                  • No more items.
                  Working...