LG L1710B - bitten off more than I can chew

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #21
    Re: LG L1710B - bitten off more than I can chew

    Originally posted by pfrcom
    I have some Rubycon YXF 47uf 63v in transit

    Could I use those in lieu of the brandX 47uf 25v with which I replaced the original Capxon ?
    As long as they fit height and diameter wise, you can go up in voltage with no problems.

    Capxon makes some of the worst capacitors in existance.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

    Related Topics

    Collapse

    • josejl
      Dell Ultrascan P991 no image.
      by josejl
      Hello. A few months ago I bought a Dell P991. I was very happy with purchase, geometry was near perfect and the colours were great.
      However, two days ago, I was using it, and the image blinked once, but it recovered. 10 minutes, it blinked again, and the image was completely gone.

      This is what happens when I try to turn it on.

      https://www.youtube.com/watch?v=ENFNS1-DYYc

      All electronic shops in my area refuse to do repairs on CRT, so I was wondering what could be the issue.

      Thanks
      11-14-2023, 08:41 AM
    • JonathanAnon
      Playstation VR Headset - Cable bitten through by dog
      by JonathanAnon
      I have one of these.



      The main cable that connects the headset to the base station was bitten through by an animal. And so now looks like this:



      Most of the wires are big enough to solder, but there seems to be three wires that are wrapped together and they are all silver in color. I'm not sure what to do with these.



      Does anybody have any experience with soldering these?

      thanks guys....
      07-23-2018, 06:47 AM
    • 0xx
      2022 Razer Blade 14 (RZ09-0427) won’t boot after Windows update, only the green LED blinks - overheated or BIOS?
      by 0xx
      Hi folks,

      My son clicked “Update and Shutdown” on a Razer Blade 14 (2022, RZ09-0427), closed the lid, disconnected the charger, and put the laptop in his backpack. The next day, it wouldn’t boot: only the green LED blinked, no fans, no keyboard backlight, no display. The chassis does get warm, so the CPU/GPU seems to get power.

      What I’ve tried so far: disconnecting the main battery, CMOS reset with power drain (30s), using a different power adapter, and connecting to the monitor - same result.

      I assumed that Windows Update was interrupted due to closing...
      09-14-2025, 03:46 PM
    • choucroutman
      Need help diagnosing why my TV isn't working anymore
      by choucroutman
      Hello, my LG OLED55C8PLA TV stopped working, and here's what happened:
      Around noon, it stopped turning on, meaning the screen stayed off, I heard a ticking sound when I tried to power it on, and the red LED light blinked 3 times. Afterward, nothing would happen for about 1 minute, and then the same cycle would repeat. A few days later, there was no more red LED blinking, and whether I tried turning it on with the remote or the power button on the back, it wouldn’t respond. I’ve tried some "quick fixes" I found online, like unplugging the TV and pressing the power button for...
      08-04-2025, 03:10 AM
    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • Loading...
    • No more items.
    Working...