Re: Samsung SyncMaster 245B Dead
I recommend replacing all these four capacitor before causing problems:
http://s807.beta.photobucket.com/use...02838.jpg.html
Helpful youtube video: http://www.youtube.com/watch?v=PCn_aG36Jt0
If you have problems with backlight, then the other two big electrolytes 1000uF/35v can also be changed (I have not have bl problems so they are still unchanged).
There is also a low quality 10uH smd power coil on video board, which might generate some annoying noise when moving mouse cursor etc. The video board is located under a metal plate, see picture
http://s807.beta.photobucket.com/use...00802.jpg.html
It does not have to be exactly 10uH, something near it will do. I have replaced this coil with 8.2uH coil. Physical size/height of the coil can and is recommended to be slightly bigger than 'original' but not much.
I recommend replacing all these four capacitor before causing problems:
http://s807.beta.photobucket.com/use...02838.jpg.html
Helpful youtube video: http://www.youtube.com/watch?v=PCn_aG36Jt0
If you have problems with backlight, then the other two big electrolytes 1000uF/35v can also be changed (I have not have bl problems so they are still unchanged).
There is also a low quality 10uH smd power coil on video board, which might generate some annoying noise when moving mouse cursor etc. The video board is located under a metal plate, see picture
http://s807.beta.photobucket.com/use...00802.jpg.html
It does not have to be exactly 10uH, something near it will do. I have replaced this coil with 8.2uH coil. Physical size/height of the coil can and is recommended to be slightly bigger than 'original' but not much.
Comment