Re: Acer AL1914 Power Light on No Display
You can try changing over the leads from the panel so the bottom ones are
plugged in where the top ones were and the top where bottom were, and see if that works.
Next unplug one lead from the non-working panel and plug in a lead from the working panel so you can find out which bulb is not working.-
For more help look here:
http://lcdparts.net/howto/instruction/G104SN03.aspx
Scroll down page and try and find your panel - if its not there just watch a few
you will get the idea.
If/when you take it apart first look for wiring defects- sometimes they just
rot away sometimes they arc to the frame. If in doubt take pics and post them for advice.
cccfls are VERY brittle/fragile - used ones more than new so you need
lots of space and time or you will end up with them all broken - it is not easy.
You can try changing over the leads from the panel so the bottom ones are
plugged in where the top ones were and the top where bottom were, and see if that works.
Next unplug one lead from the non-working panel and plug in a lead from the working panel so you can find out which bulb is not working.-
For more help look here:
http://lcdparts.net/howto/instruction/G104SN03.aspx
Scroll down page and try and find your panel - if its not there just watch a few
you will get the idea.
If/when you take it apart first look for wiring defects- sometimes they just
rot away sometimes they arc to the frame. If in doubt take pics and post them for advice.
cccfls are VERY brittle/fragile - used ones more than new so you need
lots of space and time or you will end up with them all broken - it is not easy.
Comment