Hanns G HG281D White Out on Sides

[budm]

Re: Hanns G HG281D White Out on Sides

If the fuse on the T-CON is blown or the T-CON is not getting the power from the main board, the screen will have the glow to it only.

[g2diablo]

Re: Hanns G HG281D White Out on Sides

Bringing up an old thread but, ordering the T-Conn board did fix your screen being all white? When your screen was white, could you access the menu on the monitor?

Yes. Still working! I could not access the menu when it was white. I used a newer model board and that fixed it.

[evilgeniusdan]

Re: Hanns G HG281D White Out on Sides

Yes. Still working! I could not access the menu when it was white. I used a newer model board and that fixed it.

Kind of a stupid question, but how does one remove the LCD ribbons from the old t-conn board? I have a new one I need to pop in but the locking mechanism isn't clear to me. Any help would be greatly appreciated.

Thanks,
Dan

edit: figured it out. didn't realize i was supposed to lift the black tab. thanks.

[Davi.p]

Re: Hanns G HG281D White Out on Sides

There's a mobile tab that needs to be overturned, since it is large and fragile one have to pick it in 2 points..