View sonic vx2250mw won’t turn on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Airtech_bli
    New Member
    • Nov 2011
    • 2

    #1

    View sonic vx2250mw won’t turn on

    View sonic vx2250mw won't turn on. I have check the switch
    to see if it was stuck I can hear the micro switch clicking, I checked
    the power cord it is good. I need to check the power/inverter board
    main/logic board to do that I need to open the case of the monitor with
    out breaking it can I get some help?
    Thank you
    Airtech_bli
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #2
    Re: View sonic vx2250mw won't turn on

    1) Pry it apart like this video

    http://www.youtube.com/watch?v=Ul5LhuCT1y8

    You will likely break a couple of tabs, but that is okay.

    2) Post pictures of all your boards using the manage attachments function with the following composition.

    https://www.badcaps.net/forum/showpo...94&postcount=1

    Do not post the images inline.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

    Related Topics

    Collapse

    • Document Archive
      Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) V 10 Specification for Upgrade or Repair
      by Document Archive
      This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
      09-06-2024, 05:30 AM
    • ajc333
      Dell Precision 7710 - it can not be turn on and off with the switch
      by ajc333
      Hello.
      Markings on the board AAPB0 LA-C551P REV:4.0 (A03). The laptop came to the service with the fault of shutting down after a few minutes of load such as a game. It turned out that the smaller fan was damaged, a complete original cooling system from dell was ordered and from this time everything is back to normal. The problem, however, is the inability to turn on and off the laptop with the switch. On the switch board, the voltage drops from 3V to 0V when the switch is pressed.
      On the connector on the board (from the right side) I have the following voltages:
      n1. - 3V after...
      03-10-2023, 07:27 AM
    • Natob82
      Micro Momentary Push Switch?
      by Natob82
      Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I...
      12-21-2022, 05:22 AM
    • grimacelord
      NEC TurboExpress On/Off Power Switch Replacement Help
      by grimacelord
      Hello,

      I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.

      I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.

      I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need....
      11-09-2023, 09:49 AM
    • SluggerB
      Help making a switch work the opposite way with a relay
      by SluggerB
      I have a very small float switch, I'm using in a very small tank. It only fits in one way. Link https://www.amazon.com/uxcell-Switch.../dp/B07DZ1J2GB

      I want the switch to be open when the water is high, and closed when the water is low. Unfortunately it works the opposite. And since this switch is designed to be underwater, it's all sealed up, there is no taking it apart or hacking it up.

      It will be driving a water pump, basic idea, when the water is low, switch closes, which turns on water pump, when enough water is in the tank, float switch floats,...
      02-07-2025, 07:57 PM
    • Loading...
    • No more items.
    Working...