I have a Gateway FPD1975w and one day it just shut down without any indication of problems.when I took it apart I noticed that it has the power supply from a FPD1976w. None of the cap's look bad and there is no bad spots anywere on the boards.It just wont power up not even the lite on the power button works..And yes I know Gateway SUCKS......Thanks for the help everyone..
-
-
Re: I need help
It sounds like you have it covered. Your monitor isn't working and Gateway sucks.
Glad we could help, if you have any questions, just ask.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic. -
Re: I need help
veritas odium paritComment
-
Re: I need help
no I still dont now what the problem is?????Comment
-
Re: I need help
Rather than playing games like this all afternoon, take a couple of pictures of the monitor's power supply (one of the top, one of the bottom) and attach them using 'Manage Attachments' - below the text entry area.Originally posted by jimmyd030 View Post
PlainBillLast edited by PlainBill; 09-01-2011, 02:08 PM.For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: I need help
I repaired a similar model Gateway it had bloated Samxon GF caps in it. I believe it was one of my first posts.Elements of the past and the future combining to make something not quite as good as either.Comment
Comment