lg flatron 1970hr-bf need help finding caps

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • squish1188
    New Member
    • Jul 2011
    • 1
    #1

    lg flatron 1970hr-bf need help finding caps

    my monitor has an external power supply, i took it apart today because it was flickering and found that it had two capacitors blown.
    the problem is i can't find replacements from any company that match the series
    and I'm not sure about what series would be good to swap to
    I'll put down everything i found on these capacitors:

    CapXon
    1000uf 16v
    GL series (theres the biggest problem)
    105c
    c610 ?
    vent ?
    20mm x 10mm
    5mm lead space

    any help would be greatly appreciated
    Tags: None
    • PlainBill
      Badcaps Legend
      • Feb 2009
      • 7034
      • USA
      #2
      Re: lg flatron 1970hr-bf need help finding caps

      Without a location, I can't suggest a supplier, but there are a number of caps that fit your requirements.

      Panasonic EEU-FM1C102, EEU-FC1C102S
      UCC EKZE160ELL102MJ20S, EKY-160ELL102MJ20S, ELXZ160ELL102MJ20S
      Nichicon UHE1C102MPD, UPW1C102MPD
      Vishay MAL214655102E3

      With the exception of the Vishay, all are rated for 105°C and cost between $.55 and $.75 each. The Vishay is rated for 125°C and costs about $1.50.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • momaka
          Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
          by momaka
          I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

          For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

          https://www.badcaps.net/filedata/fetch?id=3591771


          https://www.badcaps.net/filedata/fetch?id=3591772

          It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

          https://www.badcaps.net/filedata/fetch?id=359177...
          03-12-2025, 03:42 PM
        • eryjus
          Heathkit IO-4205 Power Supply Caps
          by eryjus
          Hello,

          First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

          I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

          I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
          ...
          05-10-2023, 11:21 AM
        • Paxman_Swede
          Identifying caps on an old Zoom 9000
          by Paxman_Swede
          Hello!

          I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

          The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

          I have studied the board and...
          01-14-2025, 09:51 AM
        • captain150
          Help with switching power supply caps
          by captain150
          I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
          I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
          03-16-2025, 07:34 PM
        • Foetuss
          Gigabyte GA-6OXT :: caps question
          by Foetuss
          Good evening

          I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
          Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

          But I was also suprised about the bigger boys, which are 330µF 25V.
          Could it be they used 25V caps because they were cheaper / available at that time?...
          02-11-2025, 12:22 PM
        • Loading...
        • No more items.
        Working...