Hansol H530

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mr_Bodgit
    Member
    • Dec 2010
    • 47
    • doncaster

    #1

    Hansol H530

    works fine and looks like its had a set of tubes at some point,

    the spec says 1024x768 max and any screen size bigger than that shows "OUT OF RANGE" but it will auto adjust for 1280x1024 and the desktop shows up correctly but still shows o.o.r?

    does anyone know if there is a service menu to list the hours its been on like some monitors do?

    Regs
    Rich
    Last edited by Mr_Bodgit; 12-30-2010, 12:05 PM.
  • seanc
    Badcaps Legend
    • Nov 2008
    • 1319

    #2
    Re: Hansol H530

    It's working fine.
    Some monitors will say unsupported when you go above their maximum resolution, others work but say out of range.

    Comment

    • Mr_Bodgit
      Member
      • Dec 2010
      • 47
      • doncaster

      #3
      Re: Hansol H530

      ah right i see, yeah never thought that some just turn off when out of range lol guess its a sales gimmick to buy a model that supports higher resolution from them

      still interested in used life tho if anyone knows how to bring it up

      Regs
      Rich

      Comment

      • seanc
        Badcaps Legend
        • Nov 2008
        • 1319

        #4
        Re: Hansol H530

        Squashing 1280x1024 onto a panel with a native resolution of 1024x768 looks awful. Not so much a sales gimmick, more of a 'yes we'll let you do this, just in case you get stuck in a higher resolution' message.

        Comment

        • Mr_Bodgit
          Member
          • Dec 2010
          • 47
          • doncaster

          #5
          Re: Hansol H530

          yeah thats a handy thing to have, shame others dont always allow that

          Comment

          Related Topics

          Collapse

          • Rauni
            Philips 58PUS7805/12 showed no picture; after T-Con replacement, shows halo
            by Rauni
            Hello, this is my first post on this forum, and my first attempted to repair a TV.

            My Philips 58PUS7805/12 stopped working recently. It is not that old, about 5 years. We were on a trip for a few days and when we came back, it had stopped working out of a blue (Perhaps our house was hit by a lightning strike? Don't know.)

            Read from a guide that I should test if the screen shows picture with one of the T-Con cables disconnected. Did that, it showed perfect picture (first on left, later on right side).

            Read also that we should test what happens if we...
            10-01-2023, 12:06 AM
          • abhorsen
            Help Disabling Flash Protection Range Registers on Lenovo P360 Tiny BIOS
            by abhorsen
            Hey guys,

            Hope you all are doing well. I come here from Win-Raid because I am having issues disabling Flash Protection Range Registers so I can flash my BIOS from within Windows using Intel's IFW tool/using flashrom within Linux, however I cannot due to the above mentioned error.

            Here is my thread on Win-Raid detailing the whole process I went through: https://winraid.level1techs.com/t/re...h-gen/95478/27

            Essentially I managed to boot into Windows while shorting PINs 1+5 of my audio chip to disable the HAP bit...
            07-06-2023, 10:22 AM
          • harp
            ATX brown wire sense range
            by harp
            I thinking to modify some ATX ver 1 supply, and wonder what if I connect 10k pot on 12v and center tap on brown wire? What range of 3.3v correction can to expect, or something will blow up if I close to rails, leave narrow 3.3v range?

            It is KA7500B ic, but 3v3 sense is connected to TL431, I am not sure there is any connection between.
            05-16-2024, 05:44 PM
          • Rekoo1997
            Ambient thermistor out of range
            by Rekoo1997
            dell latitude 5570
            LA-C841P
            Ambient thermistor out of range
            i am check ph601
            ph602
            ph603
            ph604
            ph605
            ph1302

            all is ok and flash bios
            and didn't fix
            Can someone please tell me where to find this sensor and how to correct the problem?



            ​...
            04-21-2025, 10:35 AM
          • taslan
            Surface 7 Pro wont boot, shows Logo and immediately turns off
            by taslan
            Hello everyone,
            as stated in the title, my surface 7 pro wont boot anymore.
            When i press the power button it shows the square windows logo for a second and immediately turtns off again.
            I dont even have a chance to get into bios or boot from usb.
            While trying to find help online it was suggested to look for help/repair here on badcaps and it might be a ME Region corruption in bios.
            I dont know what that is exactly, but i never tinkered with the bios or windows in terms of hacking/patching etc.
            Bought it directly from microsoft and used it now and then and only...
            01-16-2025, 01:25 AM
          • Loading...
          • No more items.
          Working...